Transactions of Materials and Heat Treatment

Title：Roll-forming process and CAE analysis of drawer idler slide rail

Authors： XIAO Xiao-ting YANG Dong LIAO Yi-juan(Faculty of Material and Energy Guangdong University of Technology Guangzhou 510006 China)

Unit：

KeyWords： drawer rail roll forming finite element simulation roll pass design

ClassificationCode：TG386

year,vol(issue):pagenumber：2010,35(2):31-34

Abstract：

In order to obtain some suitable process parameters of a drawer rail in roll forming,the analysis and calculations for the middle slide component of a product were completed using the method of combining theoretical calculation with finite element method simulation.The results indicate that 10 forming passes are needed for roll forming.The roll forming angles(θi) between bottom navigation and S vertical wall in different forming passes are 23°~118°.Applying simulation results to production practice,forming pass precision can meet the requirements of the roll forming.

Funds：

Reference：

[1]肖小亭,章争荣,邝卫华,等.抽屉导轨结构参数化与冲裁工艺CAD系统[J].机电工程技术,2002,31(1):31-32.
[2]陈霞,常庆明,黄志镇,等.辊弯工艺参数优化[J].机械科学与技术,2009,28(4):553-556.
[3]小奈宏,刘继英.冷弯成形技术[M].北京:化学工业出版社,2008.
[4]郑军兴.成形道次对回弹影响的模拟研究[J].锻压技术,2008,33(3):29-31.
[5]王先进,涂厚道.冷弯型钢生产及应用[M].北京:冶金工业出版社,1994.
[6]陈火红,杨剑,薛小香,等.新编Marc有限元实例教程[M].北京:机械工业出版社,2007.
[7]王慧玲,于忠奇,李淑慧.轮辋辊弯成形过程的有限元模拟[J].机械设计与研究,2008,24(6):85-88.
[8]曾国,来新民,于忠奇,等.多道次辊弯成形动力显示仿真的虚拟速度[J].上海交通大学学报,2008,42(9):1429-1433.

Service：

【This site has not yet opened Download Service】【Add Favorite】