Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Study of high temperature plasticity of TiNiNb alloy based on processing plan
Authors: YANG Gen-lin LI Fu-guo ZHAO Wei WANG Er-min HAN Jin NI Zhi-ming 
Unit: Beijing Institute of Aeronautical Materials Northwestern Polytechnical University 
KeyWords: TiNiNb alloy  constitutive equation  deformation feature  processing map 
ClassificationCode:TG306
year,vol(issue):pagenumber:2010,35(3):139-143
Abstract:

Hot deformation characteristics of as-cast TiNiNb alloy was studied by hot compression simulation tests under the strain rate range of 0.01-0.1 s-1 and the temperature of 700-1000 ℃. Based on the experiment data, hot deformation constitutive equation of as-cast TiNiNb was established. The processing plans were calculated and analyzed according to the dynamic materials model. The instability zones of flow behavior could be recognized by the plans. The optimum processing parameters of hot deformation in the range of this experiment could also be attained by the plans, in which the hot temperature was 750-880 ℃ and the strain rate was 0.310 s-1 or the hot temperature was 880-950 ℃ and the strain rate was 0.01-0.5 s-1.
 

Funds:
“十一五”装备预先研究项目(51318040105)
AuthorIntro:
Reference:


[1]Kazuhiro Otsuka, Ren Xiaobing. Developments in the research of shape memory alloys[J]. Intermetallics,1999,7:511-528.
[2]赵连城,蔡伟,郑玉峰. 合金的形状记忆效应与超弹性[M]. 北京:国防工业出版社,2002.
[3]张红纲,何勇,刘雪峰,等.NiTi形状记忆合金热压缩变形行为及本构关系[J].金属学报,2007,43(9):930-936.
[4]王艳,王明家,蔡大勇,等.高强度奥氏体不锈钢的热变形行为及其热加工图[J].材料热处理学报,2005,26(4):65-69.
[5]Srinivasan N,Prasad Y V R K. Hot working characteristics of Nimonic 75, 80A and 90 superalloys: A comparison using processing maps[J].Journal of Materials Processing Technology,1995,51:171-192.
[6]张伟红,张士宏.NiTi合金热压缩实验数据的修正及其本构方程[J].金属学报,2006,42(10):1038.
[7]王蕊宁,奚正平,赵永庆,等.Zr-4合金的热变形和加工图[J].稀有金属材料与工程,2007,36(5):809-810.
[8]郑修麟.材料的力学性能[M].西安:西北工业大学出版社,2000.
[9]张鹏,李付国,李惠曲.SiC颗粒增强铝基复合材料的热成形性能与热加工图[J].稀有金属材料与工程,2009,38(1):9-14.
[10]莫华强,李聪,王丛林,等.NiTiNb形状记忆合金的组织研究[J].核动力工程,2003,24(6):560-561.
[11]王玉凤,李付国,赵伟,等.基于热加工图的钼金属热变形特征研究[J].稀有金属材料与工程,2009,38(8):1359-1360.

 

Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com