Transactions of Materials and Heat Treatment

Title：Simulation of flexible control model of servo press with loads directly driven by SRM

Authors： SHANG Wan-feng SHAO Li-hong ZHAO Sheng-dun

Unit： Xian University of Science & Technology Zhengzhou College of Animal Husbandary EngineeringXian Jiaotong University

KeyWords： servo press SRM flexible control simulation

ClassificationCode：TG375

year,vol(issue):pagenumber：2011,36(5):57-62

Abstract：

Due to the requirement of flexibility and controllability of servo press, a hybrid closed-loop control system of servo press directly driven by SRM was proposed, a mechatronics mathematic model of servo press and flexible control model of SRM were established, and then a Simulink-based model of SRM-drive servo press was made. Finally, a deep drawing example was given for further analyzing dynamic response characteristic of this control system. The simulation results verify that the design of this servo control system is proper, and provide a theoretic support for an actual design and adjustment of servo press.

Funds：

国家自然科学基金资助项目（50575175）; 陕西省重大科技创新项目专项资金（07ZKC（二）0304）;陕西省教育厅科学研究计划（2010JK686）

Reference：

[1]孙友松,何寄平,方雅,等. 交流伺服驱动与成形装备节能[J]. 锻压装备与制造技术, 2009,(5): 29-31.

[2]赵升吨, 王军, 何予鹏,等. 机械压力机节能型气压式制动方式设计理论[J]. 机械工程学报, 2007, 43(9): 16-20.

[3]尚万峰, 赵升吨, 申亚京. 遗传优化的最小二乘支持向量机在开关磁阻电机建模中的应用[J]. 电机工程学报, 2009, 29(12): 65-69.

[4]赵婷婷, 贾明全, 王浩. 开关磁阻电机驱动螺旋压力机能量系统设计[J]. 锻压技术, 2009, 34 (3): 112-115.

[5]郑建明, 赵升吨, 尚万峰. 电机调速与伺服驱动技术在压力机行业中的应用[J]. 锻压装备与制造技术， 2007, (6):10-14.

[6]赵升吨, 邹军, 王军. 交流伺服电动机在塑性加工设备中的推广应用势在必行[J]. 伺服控制，2006,(2):16-20.

[7]何德誉. 曲柄压力机[M]. 北京:机械工业出版社,1985.

[8]刘金琨. 滑模变结构控制MATLAB仿真[M]. 北京: 清华大学出版社, 2005.

[9]吴建华. 开关磁阻电机设计与应用[M]. 北京: 机械工业出版社,2000.

[10]Sahoo S K, Panda S K, and Xu J X. Iterative learning-based high-performance current controller for switched reluctance motors[J]. IEEE Trans. Energy Conversion, 2004, 19(3): 491498.

Service：

【This site has not yet opened Download Service】【Add Favorite】