Transactions of Materials and Heat Treatment

Title：Optimization and design on drawbead of multiprocess management system based on incremental method

Authors：

Unit：

KeyWords：

ClassificationCode：TG386;TP391.9

year,vol(issue):pagenumber：2013,38(1):20-24

Abstract：

An optimization method of drawbead design was proposed based on the developed multiprocess management system. First, the serialized process plan was generated automatically with the management system and each plan was analyzed in parallel in the computer cluster with the incremental method. Then, the drawbead process parameters were optimized according to the calculated results, and the drawbead geometry parameters could be calculated with the optimized process parameters reversely. Finally, an example was tested to verify the feasibility of the method.

Funds：

国家自然科学基金资助项目（50905066）

Reference：

［1］崔令江. 汽车覆盖件冲压成形技术[M]. 北京:机械工业出版社,2003.
［2］胡江波, 柳玉起, 章志兵. 车身覆盖件模具的拉深筋工艺设计和优化[J]. 锻压技术,2008, 33(1):69-73.
［3］易国锋，柳玉起，李明林,等. 基于有限元逆算法的板料成形模拟拉深筋的灵敏度优化[J]. 中国机械工程,2007，18(1):87-90.
［4］章志兵，柳玉起，杜亭,等. 基于有限元逆算法的拉深筋工艺设计与优化[J]. 中国机械工程,2006，17(19): 2013-2016.
［5］Guo Y Q,Batoz J L, Naceur H, et al. Recent developments on the analysis and optimum design of sheet metal forming parts using a simplified inverse approach[J]. Computers and Structures,2000,78:133-148.
［6］李敏，张宜生，李德群.用于并行计算的PC集群系统构建[J]. 计算机应用研究,2009,26(3):1042-1043.
［7］李晓臣. 金属板料冲压成形的有限元模拟[J].力学学报,1995,27（3）:351-364.
［8］苏晓红,吴建军.响应面法在多次拉深成形参数优化中的应用[J]. 锻压装备与制造技术,2009，(1)：56-58.
［9］Piotr Breitkopf，Hakim Naceur，Alain Rassineux，et al. Moving least squares response surface approximation:Formulation and metal forming applications[J]. Computers and Structures., 2005,(83):1411-1428.
［10］Stoughton T B. Model of drawbead forces in sheet metal forming[A]. Proceeding of 15th Biennial IDDRG Congress[C]. Dearborn, MI, 1988.

Service：

【This site has not yet opened Download Service】【Add Favorite】