Transactions of Materials and Heat Treatment

Title：Relative movement during radial cold thread rolling

Authors： Qi Huiping Li Yongtang Ran Wentao Xiao Yuanhai

Unit： Taiyuan University of Science and Technology

KeyWords： cold thread rolling screws rotational movement relative movement

ClassificationCode：

year,vol(issue):pagenumber：2014,39(4):133-136

Abstract：

Cold thread rolling is an advanced process to produce high performance and high quality threaded parts. Theoretical research on this process is few and production process is blind for lack of theoretical guidance. The movement relationship between die and workpiece during thread rolling was analyzed. Deform-3D V6.1 was used to simulate the thread rolling process. The velocity field was obtained. Result shows that there is a line where pure rolling occurs between die and workpiece. Except this area, sliding movement always exists between die and workpiece. The line moves from the crest to the pitch diameter of the die during thread rolling.

Funds：

国家自然科学基金资助项目（50675145）；山西省自然科学基金资助项目（青年）（2009021022-1）；太原科技大学大学生创新训练计划项目（UIT）

齐会萍（1974-），女，博士，副教授

Reference：

[1]Chi H C, Shui T W, Rong S L. 3-D Finite element siumlation for flat-die thread rolling of stainless steel[J]. Journal of the Chinese Society of Mechanical Engineers, 2005, 26(5): 617-622.

[2]赵玉民，宋黎，袁明月. 钎杆波形螺纹滚压成形的数值模拟与实验研究[J]. 热加工工艺，2011, 40(5): 94-96.

Zhao Yumin, Song Li, Yuan Mingyue. Numerical simulation and experimental study on thread rolling of drill rod[J]. Hot Working Technology, 2011, 40(5): 94-96.

[3]齐会萍，李永堂，付建华. 螺纹件冷滚压工艺力学分析及数值模拟[J]. 山西冶金，2008,（2）：9-12.

Qi Huiping, Li Yongtang, Fu Jianhua. Mechanic analysis and numerical simulation on thread rolling process[J]. Shanxi Metallurgy, 2008,（2）：9-12.

[4]Qi H P, Li Y, Fu J H，et al. Minimum wall thickness of hollow threaded parts in three-die cold thread rolling[J]. International Journal of Modern Physics B, 2008, 22(31- 32): 6112-6117.

[5]闫华军，刘晋平，胡正寰，等. 楔横轧梯形螺纹轴模具关键参数的研究[J].锻压技术，2008，33（5）：98-101.

Yan Huajun, Liu Jinping, Hu Zhenghuan, et al. Research on key parameters of die rolling thread shaft in cross wedge rolling[J]. Forging & Stamping Technology, 2008, 33(5): 98-101

[6]黄小龙，黎向锋，左敦稳，等. 基于数值模拟的内螺纹冷挤压成形过程工艺参数优化[J].锻压技术，2013，37(6)：36-41.

Huang Xiaolong, Li Xiangfeng, Zuo Dunwen, et al. Optimization of processing parameters for cold extrusion of internal thread based on mumerical simulation[J]. Forging & Stamping Technology, 2012, 37(6):36-41.

[7]齐会萍.螺纹冷滚压理论与工艺参数研究[D].太原：太原科技大学，2007.

Qi Huiping. Research on the Theory and Process Parameter of Cold Thread Rolling[D]. Taiyuan: Taiyuan University of Science and Technology, 2007.

]8]崔长华. 螺纹的滚压加工[M]. 北京：机械工业出版社, 1978.

Cui Changhua. Thread Rolling[M]. Beijing: China Machine Press, 1978.

Service：

【This site has not yet opened Download Service】【Add Favorite】