Transactions of Materials and Heat Treatment

Title：Structure design of new type automatic blanking die for sheet metal

Authors： Song Hui Lu Zhenguo Liang Zhongyuan Zhong Peisi

Unit： Qingdao Huanghai College Shandong University of Science and Technology

KeyWords： blanking die automatic pushing automatic pick-off flip-type composite die

ClassificationCode：

year,vol(issue):pagenumber：2014,39(7):117-120

Abstract：

In order to change the current manual pushing and pick-off methods which are of low degree of automation existed in the production of blanking die for sheet metal, the structure design of blanking die for sheet metal was researched. The design process of blanking die was explained from the aspects such as determination of process program, calculation of die structure size, calculation of blanking force and so on. On the same bases, the automatic feeding and pick-up devices of a new type of blanking die were designed. The simulation of blanking process was carried out by function of motion simulation using 3D software. The results show that the full automatic production of processes including feeding, positioning, stamping forming, pick-up and others during blanking is realized by design of new type automatic blanking die. The efficiency and complete automation of stamping production are greatly improved and achieved respectively by this design.

Funds：

山东省自然科学基金资助项目（ZR2011EEM014）

宋慧（1983-），女，硕士，讲师

Reference：

[1] 张宏飞, 伍宇红, 聂和林. 高压大电机转子冲片通风孔斜刃式冲裁模设计[J]. 锻压技术, 2010, 35(2): 106-108.

Zhang Hongfei, Wu Yuhong, Nie Helin. Oblique cutting die design of large and high voltage generator rotor iron core sheet[J]. Forging & Stamping Technology, 2010, 35 (2): 106-108.

[2] 孟少明, 聂慧萍, 陈晨. 月牙形孔手动分度冲裁模设计[J]. 锻压技术, 2013, 38(4): 116-120.

Meng Shaoming, Nie Huiping, Chen Chen. Blanking die design of manual scale mark for crescent hole[J]. Forging & Stamping Technology, 2013, 38(4): 116-120.

[3] 马连会, 刁秋梅. 侧柱加强板斜刃切断模的设计[J]. 锻压技术, 2011, 36(3): 117-120.

Ma Lianhui, Diao Qiumei. Design of oblique cutting die for side column reinforcing plate[J]. Forging & Stamping Technology, 2011, 36(3): 117-120.

[4] 吴诗惇. 冲压工艺及模具设计[M]. 西安：西北工业大学出版社, 2002.

Wu Shidun. Sheet Metal Forming Technology and Mold Design[M]. Xian: Northwestern Polytechnical University Press, 2002.

Service：

【This site has not yet opened Download Service】【Add Favorite】