Transactions of Materials and Heat Treatment

Title：Discussion on acceptance check of warm isostatic press forming equipment

Authors： Li Lin Teng Qiang Yu Wei

Unit： China Academy of Engineering Physics

KeyWords： warm isostatic press electric safety reliability electromagnetic compatibility

ClassificationCode：TH69

year,vol(issue):pagenumber：2014,39(11):52-55

Abstract：

Warm isostactic press forming technology has become a focus in the technical field for its good formability. In order to meet the national standards and standardize the warm isostatic press market, the warm isostatic press forming equipment was analyzed from three aspects as capability, safety and environmental protection. By absorbing and referring the related technical standards and considering the characteristics of warm isostatic press forming, the test items including electric safety, capability experiment, noise experiment, running experiment, loading experiment, reliability, electromagnetic compatibility and so on were analyzed systematically, and the corresponding acceptance checks were made. According to the relevant national standards, the test items are achieved with integrity and clarity, and the detection methods are feasible.

Funds：

国家科技重大专项（2011ZX04001-081）

李麟（1987-），男，硕士，助理工程师

Reference：

［1］GB 5226.1—2008，机械电气安全机械电气设备第1部分：通用技术条件[S].GB 5226.1—2008，Electrical safety of machinery-Electrical equipment of machines-Part 1: General requirements[S].
［2］ GB/T 23281—2009，锻压机械噪声声压级测量方法[S].GB/T 23281—2009，Metal forming machinery-Noise measurement method of sound pressure levels[S].
［3］ GB/T 23567.1—2009，数控机床可靠性评定第1部分：总则[S].GB/T 23567.1—2009，Reliability evaluation for numerical control machine tools-Part 1:General rule[S].
［4］ GB/T 18268.1—2010，测量、控制和实验室用的电设备电磁兼容性要求第1部分：通用要求[S].GB/T 18268.1-2010，Electrical equipment for measurement, control and laboratory use-EMC requirements-Part 1: General requirements [S].
［5］GB 17120—2012，锻压机械安全技术条件[S].GB 17120—2012，Metalforming machinery-Safety requirements[S].
［6］JB/T 1829—1997，锻压机械通用技术条件[S].JB/T 1829—1997， Metalforming machinery-General requirements[S].
［7］GB/T 26675—2011，机床电气、电子和可编程电子控制系统绝缘电阻试验规范[S].GB/T 26675—2011，Electrical, electronic and programmable electronic control systems of machine tools-Specification of insulation resistance test[S].
［8］GB/T 26679—2011，机床电气、电子和可编程电子控制系统保护联结电路连续性试验规范[S].GB/T 26679—2011，Electrical, electronic and programmable electronic control systems of machine tools-Specification of the continuity of the protective bonding circuit test[S].
［9］GB/T 26676—2011，机床电气、电子和可编程电子控制系统耐压试验规范[S].GB/T 26676—2011，Electrical, electronic and programmable electronic control systems of machine tools-Specification of withstanding voltage test[S].
［10］GB/T 17626.2—2006，电磁兼容试验和测量技术静电放电抗扰度试验[S].GB/T 17626.2—2006，Electromagnetic compatibility -Testing and measurement techniques-Electrostatic discharge immunity test [S].
［11］GB/T 17626.4—2008，电磁兼容试验和测量技术电快速瞬变脉冲群抗扰度试验[S].GB/T 17626.4—2008，Electromagnetic compatibility -Testing and measurement techniques-Electrical fast transient/burst immunity test [S].
［12］GB/T 17626.5—2008，电磁兼容试验和测量技术浪涌(冲击)抗扰度试验[S].GB/T 17626.5-2008，Electromagnetic compatibility-Testing and measurement techniques-Surge immunity test[S].
［13］GB/T 17626.6—2008，电磁兼容试验和测量技术射频场感应的传导骚扰抗扰度[S].GB/T 17626.6—2008，Electromagnetic compatibility-Testing and measurement techniques-Immunity to conducted disturbances induced by radio-frequency fields[S].
［14］GB/T 17626.8—2006，电磁兼容试验和测量技术工频磁场抗扰度试验[S].GB/T 17626.8—2006，Electromagnetic compatibility-Testing and measurement techniques-Power frequency magnetic field immunity test[S].
［15］GB/T 17626.11—2008，电磁兼容试验和测量技术电压暂降、短时中断和电压变化的抗扰度试验[S].GB/T 17626.11—2008，Electromagnetic compatibility-Testing and measurement techniques-Voltage dips，short interruptions and voltage variations immunity tests[S].

Service：

【This site has not yet opened Download Service】【Add Favorite】