Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Influences of microalloying on tensile properties and microstructure of alloy Al-Cu-Li-Zr
Authors: Zhang Jian1  Ma Yunlong2  Li Jinfeng1  Zhu Ruihua1  Liu Qing1  Xiang Sheng1  Zheng Ziqiao1 
Unit: 1.Central South University  2.Beijing Institute of 
KeyWords: Al-Li alloy  microstructure  tensile properties  microalloying 
ClassificationCode:
year,vol(issue):pagenumber:2015,40(7):131-135
Abstract:

Influences of microalloying Mg, Zn, Mn on tensile properties and microstructure of alloy Al-Cu-Li-Zr were investigated by tensile test and TEM observation. Results show that compared with base alloy, the microalloying Mg, Zn, Mn alloy Al-3.1Cu-2.1Li-0.1Zr has higher strength after T6 aging, whose peak is improved by about 40 MPa. And the aging response of microalloying alloy is faster under T8 condition. Meanwhile, the anisotropy index of the strength of microalloyed alloy is lower. The main precipitated phases of alloy Al-Cu-Li-Zr increase for δ′, T1 and decrease for θ′. During T6 aging, the precipitated densities of δ′, T1 and θ′ are obviously improved by adding micro alloy, meanwhile less S′ phase is observed. During T8 aging, more disperse phases of δ′, T1 are effectively precipitated by adding microalloying elements.

Funds:
国家高技术研究发展计划(863计划)资助项目(2013AA032401)
AuthorIntro:
张健(1990-),男,硕士研究生
Reference:

[1]吴瑶, 许晓静, 张振强, 等. 预回复退火2099铝锂合金挤压材的组织和位错强化[J]. 稀有金属, 2015,39 (2):187-192.


Wu Y, Xu X J, Zhang Z Q, et al. Microstructure and dislocation strengthening of pre-recovery-anneal 2099 Al-Li alloy extrusions[J]. Chinese Journal of Rare Metals, 2015,39(2):187-192.


[2]魏齐龙, 陈铮, 刘兵, 等. 电场时效对铝锂合金性能和断裂特征的影响[J]. 稀有金属, 2002, 26(3):161-165.


Wei Q L, Chen Z, Liu B, et al. Effect of aging treatment under electric field on properties and fracture characteristics of Al-Li alloys[J]. Chinese Journal of Rare Metals, 2002, 26(3):161-165.


[3]李劲风, 郑子樵, 陈永来, 等. 铝锂合金及其在航天工业上的应用[J]. 宇航材料工艺, 2012, 42(1): 13-19.


Li J F, Zheng Z Q, Chen Y L, et al. Application of Al-Li alloy on the aerospace industry[J]. Aerospace Materials & Technology, 2012, 42(1): 13-19.


[4]朱小辉, 郑子樵, 钟申. Mg和Zn对2099合金时效组织与拉伸性能的影响[J]. 中国有色金属学报, 2010, 20(10):1861-1867.


Zhu X H, Zheng Z Q, Zhong S. Effect of Mg and Zn on microstructure and tensile properties of 2099 alloy[J]. The Chinese Journal of Nonferrous Metals,2010,20(10):1861-1867.


[5]Gable B M, Pana M A, Shiflet G J. The role of trace addition on the T1 coarsening behavior in Al-Li-Cu-X alloys[J]. Materials Science Forum, 2002, 396(2): 699-704.


[6]Jata K V, Hopkins A K, Rioja R J. The anisotropy and texture of Al-Li alloys [J]. Mat. Sci. Forum., 1996,217/222: 647-652.

Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com