Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Study on hot compression test for as-cast Fe-Ni based corrosion-resistant alloy
Authors: Liu Haiding  Wang Dongzhe  Huang Guoping  Zhao Anzhong  Chen Denghua 
Unit: Chongqing Materials Research Institute Co. Ltd.  Chongqing Key Laboratory of Corrosion-resistant Alloys  National Engineering Research Center for Instrument Functional Materials 
KeyWords: as-cast  Fe-Ni based corrosion-resistant alloy  hot compression deformation  stress-strain curve 
ClassificationCode:TG132.3
year,vol(issue):pagenumber:2016,41(6):138-141
Abstract:

 The stress-strain curves of aging-strength Fe-Ni based corrosion-resistant alloy were obtained by the hot compression test under conditions of temperature 900-1200 ℃(50 ℃ increments per test), strain rate 0.1 s-1 and strain 35%. The stress-strain curves vary greatly at different temperature. The peak compression stress decreases gradually with the increase of temperature, and the decreasing tendency is gradually retarded. After testing, the hardness of samples also decreases with the increase of temperature, however, the microstructure keeps its original cast structure with dendrite. When the test temperature is lower, the recrystallization grain is smaller, and it is more obvious with increasing temperature. Therefore, the tiny recrystallization grain increases, and the recrystallization fraction is far from the complete recrystallization. When test temperatures are 1150 and 1200 ℃, intergranular cracks are found in the micrograph, and it is related to over high temperature or over large single-stroke deformation. 

Funds:
基金项目:国家高技术研究发展计划项目(863计划)(2013AA031005);重庆市国际科技合作项目(cstc2013gjhz50001)
AuthorIntro:
作者简介:刘海定(1979-),男,硕士,高级工程师 E-mail:haidingliu@qq.com
Reference:

 
[1]谢锡善,董建新,胡尧和,等. 铁镍基高温耐蚀合金的研究与发展[J]. 世界钢铁, 2009,(1): 50-55.Xie X S, Dong J X, Hu Y H, et al. Research and development of Fe-Ni Based corrosion-resistant alloys[J]. World Iron & Steel, 2009,(1): 50-55.



[2]刘海定, 王东哲,魏捍东,等. 高性能镍基耐腐蚀合金的开发进展[J]. 材料导报,2013,27(3): 99-105.Liu H D, Wang D Z, Wei H D, et al. Development progress of high-performance nickel-based corrosion-resistant alloys[J]. Materials Review, 2013, 27(3): 99-105.


[3]Decker R F. The evolution of wrought age-hardenable superalloys[J]. The Journal of the Minerals,Metals & Meterials Society, 2006(9): 32-36.


[4]陈正宗,刘正东,包汉生. 铸态耐热合金CN617热变形行为研究[J]. 金属热处理,2014,39(11): 68-72.Chen Z Z, Liu Z D, Bao H S. Hot deformation behavior and processing maps of CN617 nickel-based heat-resistant alloy ingot[J]. Heat Treatment of Metals, 2014, 39(11):68-72.


[5]郭宏钢,王岩,李阳. 617B镍基高温合金铸态组织热变形行为研究[J]. 热加工工艺,2013,42(24): 51-53.Guo H G, Wang Y, Li Y. Research on hot deformation behavior of as-cast structure of 617B nickel-based superalloy[J]. Hot Working Technology, 2013,42(24): 51-53.


[6]刘国伟,赵兴东,杨艳慧,等. 铸态GH706合金的热变形行为研究[J]. 锻压技术,2015,40(9): 117-124.Liu G W, Zhao X D, Yang Y H, et al. Study on hot deformation behavior of cast alloy GH706[J]. Forging & Stamping Technology, 2015, 40(9): 117-124.


[7]王珏,梅莹,王浩宇. 铸态690合金的热压缩变形行为[J]. 材料热处理学报, 2015,36(9): 21-26.Wang J, Mei Y, Wang H Y. Hot compression behavior of as cast 690 alloy[J]. Transactions of Materials and Heat Treatment, 2015, 36(9): 21-26.

 
Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com