Transactions of Materials and Heat Treatment

Title：Research on parametric technology for gear transmission mechanism of crank press based on knowledge engineering

Authors： Song Long Jia Zhixin Xu Xiaokun

Unit： Zhejiang University

KeyWords： knowledge engineering model parameterization crank press gear transmission mechanism

ClassificationCode：TP391.7

year,vol(issue):pagenumber：2016,41(9):152-157

Abstract：

In order to shorten the design cycle of mechanical product and improve the efficiency, a new

rapid design method for mechanical product was proposed based on the SolidWorks software

platform. For the gear transmission mechanism of crank press, based on knowledge engineering

technology and combining with the parametric design method, the major part was studied, and

the knowledge engineering base of gear transmission mechanism was constructed on the basis of

instance base, template base and database. Furthermore, the CAD design of the gear

transmission mechanism of crank press was completed by the secondary development technology.

Thus, the rapid mode selection, design and calculations are achieved by this approach, and it

is beneficial to the accumulation and inheritance of design knowledge.

Funds：

宁波市科研攻关资助项目（2013A10051）

宋龙（1990-），男，硕士研究生贾志欣(1970-)，女，博士，教授

Reference：

［1］何德誉. 曲柄压力机[M]. 北京：机械工业出版社，1981.

He D Y. Crank Press[M]. Beijing: China Machine Press, 1981.

［2］车万博. 基于知识工程的典型航空模具零件参数化设计[D]. 哈尔滨：哈尔滨理工大学，2013.

Che W B. Parametric Design Systems Based on Knowledge-based Engineering in Typical Aeronautic Mold Part [D]. Harbin: Harbin University of Science and Technology, 2013.

［3］韩花丽，刘裕，钟展，等. 基于KBE的工程设计[J]. 机械研究与应用，2006，19(1)：3-5.

Han H L, Liu Y, Zhong Z，et al. Knowledge-based engineering design [J]. Mechanical Research & Application, 2006，19(1):3-5.

［4］张国丕. 基于知识工程的桥式起重机桥架设计研究及应用[D]. 郑州：郑州大学，2014.

Zhang G P. Research on Design of Bridge of Overhead Traveling Crane Based on KBE Technology and its Application [D]. Zhengzhou: Zhengzhou University, 2014.

［5］胡正寰，夏巨谌 . 金属塑性成形手册(下) [M]. 北京：化学工业出版社，2009.

Hu Z H, Xia J C. Handbook of Metal Plastic Forming(Vol.2)[M]. Beijing: Chemical Industry Press, 2009.

［6］尚慧慧，夏琴香，徐海涛，等. 基于克隆装配的压力机机身参数化设计[J]. 锻压技术，2014，39(2)：109-113.

Shang H H, Xia Q X, Xu H T，et al. Parametric design of press machine body based on clone assembly [J]. Forging & Stamping Technology, 2014，39(2):109-113.

［7］鲍东，仲梁维. 利用参数化设计技术的起重机快速设计研究[J]. 现代制造工程，2014，(2)：1-5.

Bao D, Zhong L E. Research on cranes rapid designing based on parameterized design technology [J]. Modern Manufacturing Engineering, 2014，(2):1-5.

［8］刘燕华，沈景凤，仲梁维，等. 基于知识工程的电缆保护产品模块参数化设计研究[J]. 现代制造工程，2014，(3)：56-73.

Liu Y H, Shen J F, Zhong L W，et al. Research on modular and parametric design based on knowledge engineering for cable protection product [J]. Modern Manufacturing Engineering, 2014，(3):56-73.

Service：

【This site has not yet opened Download Service】【Add Favorite】