［1］于晓明,谭丽丽,杨柯.钽金属的医学应用研究进展
［J］.材料导报, 2012, 26(1): 79-82.

Yu X M, Tan L L, Yang K. Application and research progress of tantalum as biomedical material
［J］. Materials Reports, 2012, 26(1): 79-82.

［2］张玲, 李凯, 潘庆, 等.仿真“骨小梁”牙种植体的生物力学特征
［J］.中国组织工程研究,2017,21(26):4137-4142.

Zhang L, Li K, Pan Q, et al. Biomechanical features of trabecular metal dental implants
［J］. Chinese Journal of Tissure Engineering Research, 2017, 21(26):4137-4142.

［3］郑欣, 白润, 王东辉, 等.航天航空用难熔金属材料的研究进展
［J］.稀有金属材料与工程, 2011, 40(10): 1871-1875.

Zheng X, Bai R, Wang D H, et al. Research development of refractory metal materials used in the field of aerospace
［J］. Rare Metal Materials and Engineering, 2011, 40(10): 1871-1875.

［4］张运娟, 邢不峰, 韦建军, 等.钽在硫酸-甲醇体系中的电抛光工艺研究
［J］.原子能科学技术,2011,45(10): 1177-1180.

Zhang Y J, Xing B F, Wei J J, et al. Electropolishing of tantalum in sulfuric acid-methanol electrolyte
［J］. Atomic Energy Science and Technology, 2011, 45(10): 1177-1180.

［5］钟景明, 何季麟, 汪凯, 等.芯片用担阻挡层材料织构控制技术研究
［J］.稀有金属, 2018, 42(12): 1273-1280.

Zhong J M, He J L, Wang K, et al. Texture control of tantalum barrier layer used for chips
［J］. Chinese Journal of Rare Metals, 2018, 42(12): 1273-1280.

［6］屠海令, 赵鸿滨, 魏峰, 等.新型传感材料与器件研究进展
［J］.稀有金属,2019,43(1): 1-24.

Tu H L, Zhao H B, Wei F, et al. Research progress in advanced sensing materials and related devices
［J］. Chinese Journal of Rare Metals, 2019, 43(1): 1-24.

［7］GB/T 4156—2007,金属材料 薄板和薄带埃里克森杯突试验
［S］.

GB/T 4156—2007, Metallic materials—Sheet and strip—Erichsen cupping test
［S］.

［8］顾伟, 许正宇, 周剑锋.浅析厚度<1mm冷轧低碳钢的IE值与断后伸长率的关系
［J］.理化检验-物理分册,2007,43(1):12-14.

Gu W, Xu Z Y, Zhou J F. Superficial view on the relations between IE value and elongation after break of the low carbon cold rolled steel sheet thinner than 1 mm
［J］. Physical Testing and Chemical Analysis Part A: Physical Testing, 2007, 43(1):12-14.

［9］张正修,苏哲,李欠娃.拉伸粘结瘤及其消除
［J］.五金科技,2001,29(4):11-14.

Zhang Z X, Su Z, Li Q W. Drawing the burl and its remove
［J］. Hardware Science and Technology, 2001, 29(4):11-14.

［10］毛俊东,徐岩,王辉,等.润滑对板料胀形和拉深性能的影响
［J］.机械制造与自动化, 2008, 37(5): 40-42.

Mao J D, Xu Y, Wang H, et al. Influence of lubrication on the property of bulging and drawing
［J］. Machine Building & Automation, 2008, 37(5): 40-42.

［11］雒敏, 李小平, 张亚军.凹模圆角对担材料极限拉深系数影响
［J］.世界有色金属,2018,(10):190-191.

Luo M, Li X P, Zhang Y J. Influence of concave circular angle on ultimate drawing coefficient of tantalum material
［J］. World Nonferrous Metals, 2018, (10):190-191.

［12］王海玲,崔礼春,陈世涛.某汽车尾门内板冲压工艺方案及拉深成形模设计
［J］.锻压技术,2018,43(9):55-61,74.

Wang H L, Cui L C, Chen S T. Stamping process and drawing die design for car tail-gate inner panel
［J］. Forging & Stamping Technology, 2018, 43(9):55-61,74.