Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:High-temperature constitutive equation of SA508-3 steel based on friction correction
Authors: Wu Jianguo An Hongping Liu Lili Li Qiushu 
Unit: Taiyuan University of Science and Technology 
KeyWords: hot compression true stress constitutive equation friction correction SA508-3 steel 
ClassificationCode:TG142;TG115
year,vol(issue):pagenumber:2020,45(12):178-182
Abstract:

Hot compression experiments for SA508-3 steel were carried out by thermal-mechanical simulator Gleeble-1500D with the temperature of 1073-1473 K and the strain rate of 0001-1 s-1, and the stress-strain curves of SA508-3 steel were obtained under the given deformation conditions. Then, the deformed specimen sizes were evaluated by expansion coefficient. And the data show that the friction has obvious effect on the hot compression deformation of specimens. Due to obvious friction effect,the stress obtained from the experiment can not accurately represent the true stress of material, and the experimental data were modified by the deformation work method. The results show that the stress-strain curves before and after friction correction have the same changing trend, and the modified stress value is always smaller than the experimental stress value. With the increasing of deformation degree, the difference between modified and experimental stress values increases. According to the modified stress-strain curves, the hyperbolic sine constitutive equation of SA508-3 steel is determined by data fitting, and the accuracy of the constitutive equations is verified by the average absolute relative deviation of 626% and the relative coefficient of 0998.

Funds:
山西省自然科学基金重点项目(201601D011002)
AuthorIntro:
武建国(1975-),男,博士研究生 E-mail:wjgzz951@126com 通讯作者:李秋书(1960-),男,博士,教授 E-mail: liqiushu@tyusteducn
Reference:




[1]李承亮, 张明乾. 压水堆核电站反应堆压力容器材料概述
[J]. 材料导报, 2008, 22(9):65-68.


Li C L, Zhang M Q. Overview of reactor pressure vessel steel in PWR nuclear power plants
[J].Materials Review,2008,22(9):65-68.



[2]张伟红,张士宏.NiTi合金热压缩实验数据的修正及其本构方程
[J].金属学报,2006,42(10):1036-1040.


Zhang W H, Zhang S H.Correction of hot compression test data and constitutive equation of NiTi alloy
[J]. Acta Metallurgica Sinica,2006,42(10):1036-1040.



[3]Ebrahimi R,Najafizadeh A.A new method for evaluation of frictio in bulk metal forming
[J]. J. Mater.Process Technol.,2004,152(20):136.



[4]李萍,段园培,张青,等.基于摩擦修正的TB8合金热压缩流变应力行为分析
[J].稀有金属,2009,33(2):137-141.


Li P, Duan Y P, Zhang Q, et al.Flow stress behavior of TB8 alloy under hot compression deformation based on friction correction
[J].Chinese Journal of Rare Metals,2009,33(2):137-141.



[5]Liang X P, Liu Y, Li H Z. Constitutive relationship for high temperature deformation of powder metallurgy Ti-47Al-2Cr-2Nb-02W alloy
[J]. Materials & Design,2012,37(5):40-47.



[6]陈正宗, 刘正东, 包汉生. 耐热合金热压缩修正后本构方程及热加工图
[J]. 钢铁研究学报, 2015, 27(9):44-48.


Chen Z Z, Liu Z D, Bao H S.Corrected constitutive equation and processing maps of nickel-based heat-resistant alloy CN617 after hot compression test
[J].Journal of Iron and Steel Research,2015, 27(9):44-48.



[7]Ebrahimi R, Najafizadeh A. A new method for evaluation of friction in bulk metal forming
[J]. Journal of Materials Processing Technology, 2004, 152(2):136-143.



[8]Sellars C M,Mctegart W J. On the mechanism of hot deformation
[J].Acta Metallurgica,1966,14 (9): 1136-1138.



[9]Jonas J J,Sellars C M,Tegart W J M. Strength and structure under hot-working conditions
[J]. Metallurgical Reviews,1969,14 (1): 1-24.



[10]Zener C,Hollomon J H. Effect of strain rate upon plastic flow of steel
[J]. Journal of Applied Physics,1944,15 (1): 22-32.



[11]周研. 铸态40CrNiMo合金钢热变形过程组织演变及数值模拟研究
[D]. 秦皇岛:燕山大学,2017.


Zhou Y. Study on Microstructure Evolution and Numerical Simulation of Hot Deformation Process of Casting Alloy Steel 40CrNiMo
[D]. Qinghuadao:Yanshan University,2017.



[12]Mandal S, Rakesh V, Sivaprasad P V, et al. Constitutive equations to predict high temperature flow stress in a Ti-modified austenitic stainless steel
[J]. Materials Science & Engineering A, 2009, 500(1-2):114-121.

Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com