Transactions of Materials and Heat Treatment

Title：Three-dimensional curved surface flexible rolling technology based on rigid arc-shaped rollers and its experimental study

Authors： Li Rui Wang Xintong Li Wenzhou Li Mingzhe

Unit： Changchun Ruiguang Technology Co. Ltd. Jilin University

KeyWords： flexible rolling 3D curved surface continuous forming reduction amount longitudinal curvature

ClassificationCode：TG306

year,vol(issue):pagenumber：2022,47(10):186-190

Abstract：

In order to achieve continuous and efficient processing of three-dimensional (3D) curved surface parts, a new type of flexible forming method, namely 3D curved surface flexible rolling based on rigid arc-shaped rollers, was proposed, which adopted rigid rollers with arc busbars as the forming tools, and by adjusting the distance between upper and lower rollers to form the reduction with a certain distribution law, the sheet metal was plastically deformed simultaneously along the rolling and transverse directions when passing through the rotating rollers so as to realize the continuous curved surface forming. Then, the research significance and basic principles of this forming method were described, and a flexible rolling experimental device was developed. Besides, the forming tests of curved surface parts with different shapes such as spherical and saddle shapes were carried out, and the forming parts with good surface quality were obtained. The experimental results verify the stability of 3D curved surface flexible rolling process based on rigid arc-shaped rollers and prove that many curved surface parts with different curvature radii and shapes can be obtained only using a pair of rollers, which lays a foundation for further practical research.

Funds：

国家自然科学基金资助项目（51275202,50575090）

李锐 (1987-)，男，学士，工程师，E-mail：1215939203@qq.com

Reference：

[1]岳太文，陈晓辉，门正兴，等. 6061铝合金板数控单点渐进温成形工艺多目标优化 [J]. 锻压技术，2020，45(12)：59-64.

Yue T W，Chen X H，Men Z X，et al. Mulitobjective optimization on NC single point incremental warm forming process for 6061 aluminum alloy sheet [J]. Forging & Stamping Technology，2020，45(12)：59-64.

[2]程艳艳，王鑫，刘祥玲，等. 梯形轮廓曲面件多夹钳拉形的成形力研究[J]. 锻压技术，2021，47(7)：95-99.

Cheng Y Y，Wang X，Liu X L，et al. Research on forming force of multi-gripper stretch forming for trapezoidal profile curved part [J]. Forging & Stamping Technology，2021，47(7)：95-99.

[3]Yoon S J，Yang D Y. An incremental roll forming process for manufacturing doubly curved sheets from general quadrilateral sheet blanks with enhanced process features [J]. CIRP Annals，2005，54 (1): 221-224.

[4]Shim D S，Yang D Y，Kim K H，et al. Numerical and experimental investigation into cold incremental rolling of doubly curved plates for process design of a new LARS(Line array roll set) rolling process [J]. CIRP Annals，2009，58 (1): 239-242.

[5]Li M Z，Nakamura K，Watanabe S，et al. Study of the basic principles (1st report: Research on multipoint forming for sheet metal) [A]. Proceedings of the Japanese Spring Conference for Technology of Plasticity[C]. Japan，1992.

[6]于华民, 董方,吴运新,等. 大型铝合金C形截面环轧制过程数值模拟和轧制区成形规律分析[J]. 锻压技术,2021,46(11):197-206.

Yu H M，Dong F，Wu Y X，et al. Numerical simulation on rolling process and analysis on rolling zone forming law for large aluminum alloy Cshaped crosssection ring[J]. Forging & Stamping Technology，2021，46(11)：197-206.

[7]杜忠民, 肖凡,刘维,等. 船用双曲率板件冷压成形回弹模拟与试验[J]. 锻压技术,2021,46(5):34-38.

Du Z M，Xiao F，Liu W，et al. Simulation and experiment on springback for cold stamping of marine double-curvature plate part[J]. Forging & Stamping Technology，2021，46(5)：34-38.

[8]李明哲，胡志清，蔡中义，等. 自由曲面工件的连续高效塑性成形方法 [J]. 吉林大学学报：工学版，2007, 37(3): 489-494.

Li M Z，Hu Z Q，Cai Z Y，et al. Method of efficient continuous plastic forming for freeform surface part [J]. Journal of Jilin University: Engineering and Technology Edition，2007, 37(3): 489-494.

[9]李明哲，蔡中义，李任君，等. 基于弯曲辊轧制的曲面零件连续成形方法 [J]. 机械工程学报，2012，48 (14): 44-49.

Li M Z，Cai Z Y，Li R J，et al. Continuous forming method for three-dimensional surface parts based on the rolling process using bended roll [J]. Journal of Mechanical Engineering，2012，48 (14): 44-49.

[10]Wang X T，Li M Z. Research on three-dimensional curved surface rolling based on rigid arc-shaped rollers [J]. The International Journal of Advanced Manufacturing Technology，2020，107 (1): 805-814.

[11]Chang X，Fu W Z，Li M Z，et al. The flexible rolling process of three-dimensional curved parts using an auxiliary plate based on rigid arc-shaped rollers [J]. The International Journal of Advanced Manufacturing Technology，2021，116: 1103-1113.

[12]Wang X T，Li M Z，Chang X. Influence of thickness reduction on the forming results in the three-dimensional surface rolling process with rigid arc-shaped rollers [J]. The International Journal of Advanced Manufacturing Technology，2021，114 (7): 2397-2405.

Service：

【This site has not yet opened Download Service】【Add Favorite】