|
摘要：
|
|
首次利用人工神经网络技术对影响拉深过程中法兰下摩擦系数的工艺参数及润滑油参数进行了分析 ,提出了润滑油选择方案并描述了神经网络建模过程。神经网络预测计算结果与实际符合较好。对自行设计的试验装置进行了简要描述并提出了试验数据误差修正公式 ,实践证明 ,该公式有效的减少了试验误差。
|
|
Taking into consideration both the principal technological parameters and several parameters of lubricant,a model of artificial neural network is constructed to predict the average coefficient of friction under flange during drawing.The selections are made to choose proper lubricant under certain operating condition according to the predicted results.The predicted results show good agreement with experimental data.Then the experimental setup are described concisely which are designed by ourself and a formulation to correct experimental errors is introduced which works to give more accurate data.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
1 Zhang Zhiliang,Li Cheng. Study of the friction characteristics oflubricants and their affecting factors during drawing. J. Mater.Proc. Tech,1 997,63 :1 4 4～ 1 4 7
2 张立明 .人工神经网络的模型及应用 .上海 :复旦大学出版社 ,1 993 .
3 焦李成 .神经网络系统理论 .西安 :西安电子科技大学出版社 ,1 992 .
4 许永顺 ,邢渊 ,阮雪榆 .基于神经网络的塑性加工缺陷诊断与预测的方法研究 .锻压技术 ,1 998( 1 ) .
5 张兆春 ,吴铸等 .模式识别 -人工神经网络在改善汽车发动机缸体铸件力学性能方面的应用 .金属学报 ,1 998,3 4 ( 1 0 ) :1 0 68～ 1 0 72
6 张兴全 ,彭颖红 ,阮雪榆 .在数值模拟基础上利用神经网络进行缺陷预测 .锻压技术 ,1 998( 3 ) .
7 A Behrens,H Schafstall. 2 D and 3 D simulation of complexmultistage forging processes by use of adaptive friction coefficient.J. Mater. Proc. Tech. 1 998,80 -81 :2 98～ 3 0 3
8 P Myllykoski,JLarkiola,JNylander.Developmentof predictionmodel for mechanical properties of batch annealed thin steel stripby using artificial neural network modelling.J.Mater.Proc.Tech.1 998,60 :3 99～ 4 0 4
9 L A Dobrzanski,W Sitek. Application of a neural network inmodelling of hardenability of constructional steels.J.Mater.Proc.Tech. 1 998,78:59～ 66
1 0 宋世远 ,范新华等 .粘度指数改进剂对油性极压剂润滑性的影响研究 .润滑与密封 ,1 998( 6) .
1 1 JM Lanzon,M JCardew-Hall,P D Hodgson. Characterisingfrictional behaviourin sheetm etal forming.J.Mater.Proc.Tech.1 998,80 -81 :59～ 66
1 2 何丹农 ,沈利冰 ,程鹏 .研究拉深过程中的摩擦系数分布 .金属成形工艺 ,1 998( 1 6) :3 7～ 3 9
1 3 A M de Sanctis,A Forcellese,S M Roberts,P JWither.Frictionalbehaviour of Al3 59/Si C/2 0 p composite under isotherm al andnonisothermal hot-working conditions as a function of surfaceroughness. J. Mater. Proc. Tech. 1 997,72 :1 95～ 2 0 0
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
