|
摘要：
|
|
锻件质量和锻造行业的技术经济效益很大程度上取决于预成形工步和预成形设计。由于问题的复杂性 ,通常是在实际生产经验基础上 ,通过反复试验的方法进行预成形工步和预成形设计。显然 ,这种情况已不能满足以信息技术为主导的高新技术发展的需要。本文介绍一种基于正向有限元数值模拟和最优化方法的锻件预成形设计新方法 ,并对这种方法实施过程中遇到的若干关键技术进行探讨。应用根据这种方法所建立的锻件预成形设计原型系统 ,对 FGH95合金涡轮盘锻件用坯料进行预成形设计 ,取得了令人满意的结果。
|
|
Forging quality and technical economic benefit of plastic working industries strongly depend on preform sequence and preform design.Because of the complexity of problem,the preform sequence and preform are usually determined through trial and error method based on practical experience and intuition.Obviously,the above situation could not meet the needs of development of high tech dominated by information technique.In present paper,a new preform design method based on FEM numerical simulation and optimization was presented,and several know how that must be solved during the implementation of the new method were investigated.The preform for FGH95 turbine disk forging was designed by using the preform optimization prototype system developed by the authors,the obtained results were satisfied.
|
|
基金项目：
|
|
国家自然科学基金!(批准号 598750 71 )资助项目
|
|
作者简介：
|
|
|
|
参考文献：
|
1 Sun Sheng,Guan Tingdong.The Reverse Simulation Technique ofDie Forging Based on U BET and its Application,J.Mech.Engrg.1 991 ,4 ( 3 ) :1 77～ 1 83
2 S Kobayashi.Approximate Solutions for Preform Design in ShellNosing.Int.J.MTDR,1 983 ,2 3 :71～ 82
3 C S Han,R V Grandhi,R Srinivasan.Optimium Design of ForgingDie Shapes Using Nonlinear Finite Element Analysis.J.AIAA,1 993 ,3 1 ( 4) :774～ 781
4 Guoqun Zhao,E Wright,R V Grandhi.Forging Preform Designwith Shape Complexity Control in Simulating BackwardDeformation. Int.J.mach.Tools Manufact,1 995,3 5( 9) :1 2 2 5～1 2 3 9
5 G Zhao ,E Wright,R V Grandhi.Computer Aided Preform Designin Forging Using the Inverse Die Contact Tracking Method.Int.J.Mach.Tools Manufact,1 996,3 6( 7) :755～ 769
6 S Badrinarayanan,N Zabaras.A Sensitivity Analysis forthe Designof Metal Forming Processes.Comput.Methods Appl.Mech.Engrg,1 996,1 2 9:3 1 9～ 3 4 8
7 L Fourment,J L Chenot.Optimal Design for Non-Steady-StateMetal Forming Processes-I.Shape Optim ization Method.Int.J.Numer.Methods.Eng,1 996,3 9:3 3～ 65
8 万耀宇 ,梁庚荣 ,陈志强 .最优化计算方法 .北京 :工人出版社 ,1 983 :51～ 58
9 S Kobayashi,S I Oh,T Altan. Metal Forming and the FiniteElement Method. Oxford University Press,New York,U SA,1 989:90～ 1 2 9
1 0 张麦仓 .粉末高温合金涡轮盘成形过程数值模拟 .西北工业大学博士学位论文 ,1 999
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
