|
摘要：
|
|
以Φ57 mm×Φ57 mm×1.5 mm TA2薄壁等径T型管件为典型试验对象,采用液压胀形方法研究了由等厚薄壁无缝钛管材生产钛T型管件的胀形工艺。结果表明,钛T型管件可通过同规格无缝管材在专用设备上液压胀形生产,胀形次数以≥3次为宜;计算钛合金液压胀形单位压力时,应对金属材料胀形单位压力计算公式中的系数1.15进行修正,取1.35~1.6较为适宜。
|
|
Choosing Φ57mm×Φ57mm×1.5mm TA2 thin wall T fitting as the researching object,the hydroforming technology producing titanium T fitting with seamless thin wall tube was studied.The results indicate that titanium T fitting can be produced through seamless tube hydroforming for three times or more operations using special equipment.For calculating the hydroforming pressure of titanium alloy,the coefficient 1.15 in the equation for normal metals should be amended to be 1.35-1.6.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Grey J E,Devereaux A P,Park W N.Apparatus for makingwrought metal Ts:US 2203868[P/OL].1939-02-03.
[2]Li mb M E,Chakrarty J,Garber S,et al.The forming ofaxisymmetric and asymmetric components from tubes[A].Proceedings of the 14thInternational MTDR Conference[C].New York:Macmillan Press,1973.
[3]Volerstern F,Prange T,Sander M.Hydroforming:needs,developments and perspective[A].Proceedings of the 6thIC-TP[C].New York:Springer Verlag,1999.
[4]Manabe K,Suetake M,Koyama H,et al.Hydroformingprocess opti mization of aluminum alloy tube using intelligentcontrol technique[A].Proceedings of the 1thICFT[C].Harbin:Harbin Institute of Technology Press,2004.
[5]王树勋,林法禹,魏华光.实用模具设计与制造[M].湖南:国防科技大学出版社,1991.
[6]黄伯云,李成功.中国材料工程大典:第4卷[M].北京:化学工业出版社,2006.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
