|
摘要：
|
|
根据锻锤隔振的设计原理和结构特点,利用VC++,Pro/TOOLKIT,Access等有关编程工具,在Pro/E平台下建立了锻锤隔振CAD系统。该系统主要由原理设计模块、参数化设计模块、标准件库设计模块组成,根据用户选择相应的隔振方案、隔振参数、标准件型号,交互式的输出隔振系统零部件的三维及二维图形,并以BOM清单的形式将零部件质量、材料、数量、备注等基本信息进行输出。实例证明,利用该系统可以方便地设计出参数化的隔振装置,显著提高了隔振装置的设计效率。
|
|
The CAD system of vibration isolation for forging hammer based on the platform of Pro/E was established.According to the design principle and structure characters of vibration isolation for forging hammer by using VC++,Pro/TOOLKIT and Access.The system was mainly composed of principle module,parametric module and standard parts library module which can output the 3D and 2D of the components interactively.The information of the components,for example,the mass,material,quantity and remark were outputed by the system as well.The sample approves that it is quite convenient to design parametric equipment by using the system and can improve the design efficiency obviously.
|
|
基金项目：
|
|
南昌市2007年科技资助项目
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]张卫.锻锤噪声与振动污染控制[J].钢铁,1995,30(12):12-15.
[2]吕玉恒.噪声与振动控制技术讲座[J].振动与冲击,1995,14(1):10-13.
[3]杨国泰,何成宏.采用锻锤隔振技术治理锻锤振动公害[J].重型机械,1991,(3):7-10.
[4]刘新房.关于消极隔振理论的一点探讨[J].建筑结构,1995,(3):17-20.
[5]何成宏.隔振与缓冲[M].北京:航空工业出版社,1996.
[6]陈维民,何永标.锻锤减振隔振技术的研究与进展[J].锻压技术,1996,21(3):19-22.
[7]杨国泰,何成宏.锻锤和压力机隔振技术[J].机械工程学报,1997,33(1):20-23.
[8]李世国.Pro/TOOLKIT程序设计[M].北京:机械工程出版社,2003.
[9]Parametric Technology Corporation.Pro/TOOLKIT User’sGuide[M].Massachusetts:PTC,2003.
[10]张继春.Pro/ENGI NEER二次开发实用教程[M].北京:北京大学出版社,2003.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
