|
摘要：
|
|
采用不同激光焊接工艺参数对不同厚度的B170P1高强度钢进行焊接,并对焊后试样进行拉伸试验,研究不同激光焊接工艺对拼焊板力学性能的影响。结果表明:在焊接质量合格的情况下,焊接功率越高,焊接件的塑性和韧性越差;适当增加焊接速度,可以提高焊接件的塑性和韧性;随着热输入量的增加,真实应力-应变曲线也随之升高,表明焊缝的塑化能力随着热输入量的增加而减小,采用较小的热输入量可以提高拼焊板的塑性成形性能。
|
|
Two types of B170P1 high-strength steel with different thicknesses were welded with different laser welding process parameters.The tailor-welded blanks were examined in tensile test.The mechanical property was investigated for the different laser welding parameters.The results show that the welding specimens with higher power have lower plasticity and ductility if the welding quality is eligible.Increasing the welding speed appropriately can enhance the plastic nature and ductility of welding specimens.The true stress-strain curve will be higher with the increasing heat input.It indicates that the plasticizing capacity will decrease with the increase of heat input.Small heat input can increase the plastic forming properties of tailor-welded blanks.
|
|
基金项目：
|
|
国家自然科学基金资助项目(50775102);;
江苏省教育厅“青蓝工程”资助项目(苏教师〔2007〕2号)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Zadpoor A,Sinke J,Benedictus R.Mechanics of tailor wel-ded blanks:an overview[J].Key Engineering Materials,2007,344:373-382.
[2]Sushanta Kumar Panda,Ravi Kumar D,Kumar Harish,etal.Characterization of tensile properties of tailor welded IFsteel sheets and their formability in stretch forming[J].Jour-nal of Materials Processing Technology,2007,183(2-3):321-332.
[3]Chan L C,Chan S M,Cheng C H,et al.Formability andweld zone analysis of tailor-welded blanks for various thick-ness ratios[J].Journal of Engineering Materials and Tech-nology,2005,127(4):179-185.
[4]Cheng C H,Jie M,Chan L C,et al.True stress-strain analy-sis on weldment of heterogeneous tailor-welded blanks-a novelapproach for forming simulation[J].International Journal ofMechanical Science,2006,8:1-13.
[5]张士宏,程欣,郎利辉,等.不等厚拼焊板的塑性拉伸变形性能试验分析[J].金属成形工艺,2000,18(6):10-13.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
