|
摘要：
|
|
通过分析导柱导套配合间隙对冲裁间隙的影响、冲裁力对冲裁间隙的影响以及导柱导套形位误差对冲裁过程的影响,提出冲裁模中导柱导套设计的一些基本思路和方法,以便克服导柱导套设计的盲目性。根据分析和计算结果,指出设计资料中关于导柱导套配合间隙选择中的欠妥说法,并提出将两导柱中的一导柱设计成棱形导柱以降低导柱导套形位公差要求的可行办法。
|
|
By analyzing the influences of the blanking force and the fit clearance of guide pillars and guide bushes to the blanking clearance,and the influences of the error of the form and position of guide pillars and guide bushes on the blanking process,some basic mentalities and methods about the design of guide pillars and guide bushes in blanking dies were developed,and how to overcome the designing blindness of guide pillars and guide bushes was pointed out.According to the results of analysis and calulation,the under correction desining information in the manual were pointed out in choosing the fit clearance of guide pillars and guide bushes,and a feasible solution was proposed to reduce the request of the tolarance of the form and position of the guide pillars and guide bushes by designing an lozenge guide pillar of two guide pillars.
|
|
基金项目：
|
|
广州工程技术职业学院基金项目
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]丁松聚.冷冲模设计[M].北京:机械工业出版社,2001.
[2]熊南峰,石其年.冷冲模具设计[M].北京:科学出版社,2005.
[3]陈剑鹤.冷冲压工艺与模具设计[M].北京:机械工业出版社,2001.
[4]成都模具工业协会.冲压模设计师手册[M].北京:机械工业出版社,1990.
[5]刘鸿文.材料力学(上)[M].北京:人民教育出版社,1979.
[6]徐鸿本.机床夹具设计手册[M].辽宁:辽宁科学技术出版社,2004.
[7]赵燕,刘光华.线切割一次成形凹凸模及间隙计算[J].锻压技术,2007,32(1):67-70.
[8]黄觉民.线切割加工与凹凸模设计[J].锻压技术,1994,19(1):41-43.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
