|
摘要：
|
|
从微塑性成形技术入手,结合半固态金属良好的成形性能,对半固态金属ZL101铝合金进行正挤压成形实验研究,探讨了半固态金属微成形流动性性能,分析比较了温度、挤出直径、工作带对金属流动性的影响。实验结果表明:微成形条件下,半固态成形可以大大降低挤压载荷;半固态微成形出现了类似尺度效应的现象;工作带越小,挤出长度越长。
|
|
Study on semisolid alloy of ZL101 was carried out,which combined the good feature of semisolid ZL101 and micro-forming to discuss the fluidity of micro-formability of semi-solid ZL101 alloy.The analysis and comparison of three important parameters of temperture,extrusion diameter and die bearing for the influence of metal fluidity were made.The results show that semi-solid forming under the micro-forming condition can significantly reduce the extrusion load;a phenomenon which is similar to scale effect happens during semi-solid micro-forming process;die bearing is smaller and extrusion length is longer.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]杨湘杰.半固态合金(A356)触变成形流变特性及其浇道系统的研究[D].上海:上海大学,1999.
[2]童忠财.半固态微挤压工艺的初步研究[D].上海:上海交通大学,2007.
[3]雷晚勤.ZL101二次加热微正挤压试验研究[D].上海:上海交通大学,2008.
[4]罗中华.有色合金半固态触变挤压成形数值模拟技术与挤压组合凹模优化设计[D].上海:上海交通大学,2005.
[5]段兴旺.半固态ZA27合金等温挤压[J].锻压技术,2006,27(7):743-745.
[6]申昱,于沪平,阮雪榆.材料塑性与几何尺寸关系研究[J].锻压技术,2006,31(3):64-67.
[7]Geiger M,Vollertsen F,Kals R.Fundamentals on manu-facturing of sheet metal micro-parts[J].Annals of theCIRP,1996,45(1):277-282.
[8]申昱,于沪平,阮雪榆.微小尺度镦挤复合成形研究[J].塑性工程学报,2006,13(1):58-61.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
