|
摘要：
|
|
以圆柱体大头位于中段和端部两种常见直长轴类模锻件为研究对象,运用数值模拟和物理实验相结合的方法,探讨了不经制坯直接终锻时坯料尺寸与填充效果的关系。结果表明:坯料截面积与锻件最大截面积之比F0/F1达到一定值时,按传统文献规定需要压肩的某些锻件,可直接终锻(材料利用率70%以上)。卧锻较立锻易填充,中段大头较端部大头易填充。同时,验证了填充效果与变形速度有很大关系,实验结果为小尺寸模锻件工艺设计提供了参考价值。
|
|
By taking two typical straight-long-axle die forgings with big cylindrical head in the middle or in the end as the research objects,the relation of blank sizes and filling effect was investigated by combining numerical simulations and physics experiments when finish-forging directly without performing. The results show that some die forgings which need necking according to regulations of traditional literatures can finish-forge directly (stock utilization is more than 70%),when the ratios between the sectional area of blank and maximum sectional area of forgings (F0/F1 ratio) reaches to acertain value. The filling effect of forging horizontally is better than vertically,and forging with head in the middle is better than that in the end. Meanwhile,the great relation of filling effect and deformation velocity is verified and the results are expected to provide reference for the technological design of small die forgings.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]布留哈诺夫A H,烈别耳斯基A B.模锻及模具设计:上册[M].王树良,冯桐笙,译.北京:机械工业出版社,1958.
[2]西安交通大学金属压力加工教研组.锻造工艺学[M].北京:中国工业出版社,1958.
[3]张志文.锻造工艺学[M].北京:机械工业出版社,1983.
[4]吕炎.锻造工艺学[M].北京:机械工业出版社,1995.
[5]胡亚民,华林.锻造工艺过程及模具设计[M].北京:中国林业出版社,北京大学出版社,2006.
[6]李集仁,杨良伟.锻工实用技术手册[M].南京:江苏科学技术出版社,2002.
[7]夏巨谌,韩凤麟,赵一平.中国模具设计大典:第4卷锻模与粉末冶金模设计[M].南昌:江西科学技术出版社,2003.
[8]郝滨海.锻造模具简明设计手册[M].北京:化学工业出版社,2005.
[9]俞汉清,陈金德.金属塑性成形原理[M].北京:机械工业出版社,2005.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
