|
摘要：
|
|
通过具体的实例,不仅阐述了使用激光强化技术解决拉深模具压边圈拉伤问题,而且通过模具材料及热处理的选择,进行激光强化处理,改变模具压边圈传统的制造工艺,并对模具的加工手段、方法、材料的选用等方面进行深入的探讨和研究。本文还阐述了激光强化处理的性能特点。模具采用激光强化技术后在使用寿命、降低废品率方面都有明显效果,数套模具验证结论显示了激光强化技术在模具应用的广泛前景。
|
|
Through a specific example,it not only described laser-hardening technology for solving deep drawing mould blank-holder hamstring problem,but also through the mould material and heat treatment options,laser hardening,changing the traditional manufacturing technology of mould blank-holder were carried out. The deep discussion about the processing means,methods,and material selection,etc.was done. Laser hardening characteristics were also expounded. Drawing mould obviously improved the service life and reduced waste after adopting the laser technology to enhance surface hardening. Several sets of mould verification conclusion shows that laser hardening technology applicationin mould has a wide prospect.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]蒋昌生,蒋勇.模具表面强化处理[J].锻压技术,1993,18(4):46-49.
[2]冯荣元.模具激光强化处理技术[J].模具制造,2006,(11):76-80.
[3]李儒荀,平雪良.连续激光强化模具刃口的工艺研究[J].电加工,1995,(6):34-36.
[4]关振中.激光加工工艺手册[M].北京:中国计量出版社,1998.
[5]刘江龙,邹至荣.高能束热处理[M].北京:机械工业出版社,1997.
[6]陈大明,徐有容.模具钢表面激光熔覆硬面合金层改性研究[J].金属热处理,1998,23(1):26-28.
[7]陈光南.激光热处理新技术及其应用[J].金属热处理,1998,23(7):34-37.
[8]冯荣元.激光强化模具的材料替代技术[J].机械工人:热加工,2004,(7):20-22.
[9]林朝平.激光表面淬火在模具制造中的应用[J].新技术新工艺:热加工技术,2004,(7):38-39.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
