锻压技术

可重构柔性模具蒙皮拉形模面生成方法研究与实现

英文标题：Algorithm research and development of die surface generation over reconfigurable tooling

作者：张文阳李东升李小强杜宝瑞

分类号：V261.2

出版年,卷(期):页码：2009,34(2):145-148

摘要：

针对可重构柔性模具模面生成中的模面空间定位、钉头球心坐标计算等若干问题进行了深入的研究,给出了合理的计算方法。采用CAA二次开发技术在CATIA V5上实现了相关算法,开发了模面生成模块。该模块具有钉柱高度计算,柔性模具三维虚拟装配、数据动态调整和结果校核等功能。通过试验验证了上述算法的可靠性。模面生成模块的开发为可重构柔性模具拉形工艺在实际生产中的应用提供了技术保障。

Several problems,such as spacial orientation of die surface and coordinate calculation of pins' sphere center were investigated in die surface generation over reconfigurable tooling,and their solving algorithms were given.The die surface generation function block was developed in CATIA software which fulfills all the algorithms by using CAA redevelopment technique.This function block provides with functions of pin height calculation,3D virtual assembling of reconfigurable tool,data dynamical modification,and data examination for pins adjusting.The reliability of algorithms was validated by experiment.The development of this function block provides a technical support for the application of sheet stretch forming process over reconfigurable tooling.

基金项目：

国家科技支撑计划资助项目(2006BAF04B00)

参考文献：

[1]罗红宇,李东升.蒙皮拉形可重构柔性模具模面生成系统开发及应用研究[J].塑性工程学报,2006,13(6):61-65.
[2]Anagnostou E L,Papazian J M.Optimized tooling design al-gorithm for sheet metal forming over reconfigurable complianttooling[A].Materials Processing and Design:Modeling,Simulation and Applications-NUMIFORM 2004-Proceedingsof the 8th International Conference on Numerical Methods inIndustrial Forming Processes[C].Columbus,Ohio(USA):AIP,2004.
[3]Simona Socrate,Mary C Boyce.A finite element based diedesign algorithm for sheet-metal forming on reconfigurabletools[J].Journal of Engineering Materials and Technology,2001,123(4):489-495.
[4]刘纯国,李明哲.多点技术在飞机板类部件制造中的应用[J].塑性工程学报,2008,15(2):109-114.
[5]John M.Papazian.Tools of change[EB/OL].http://www.memagazine.org/backissues/membersonly/feb02/fea-tures/toolsof/toolsof.html,2008/3/2.
[6]孙刚,李明哲.多点成形时工艺方式与工件压痕的关系研究[J].材料科学与工艺,2004,4(12):360-363.
[7]宋雪松,蔡中义,李明哲.多点成形中压痕的数值模拟及极限成形力的分析[J].材料科学与工艺,2004.4(12):368-371.
[8]何朝良,周安宁,刘毅.基于CAA的CATIA二次开发初探[J].自动化技术与应用,2006,25(9):37-40.
[9]董伊鑫,席平.基于CATIA的界面二次开发[J].航空制造技术,2006,(12):83-86.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】