|
基于单片机的双线式集中润滑控制系统设计
|
|
英文标题：Design of two-line centralized lubrication system based on SCM |
|
作者：严宏志 刘明 徐畅 |
|
单位：中南大学机电工程学院 |
|
关键词：125MN挤压机 集中润滑 分配器 单片机 |
|
分类号：TG375 |
|
出版年,卷(期):页码：2009,34(3):92-95 |
|
摘要：
|
|
以实现润滑脂在125MN挤压机上自动润滑为目标,根据125MN挤压机润滑点性质及分布的特征,研究开发了以单片机为技术核心的集中润滑系统,包括定时启/停、时间调节、油位与压力报警、油箱自动补脂等控制过程,满足了自动润滑、自动补脂的需求,为125MN挤压机集中润滑系统的实施、提高挤压机运行效率、减少其磨损奠定了基础。
|
|
To achieve the goal that the automatic lubricating of grease could be realized on a 125MN extruder, according to characteristics of the lubricated points and the feature of their distribution on the 125MN extruder, a centralized lubrication system whose core technology was SCM was studied and developed.The lubrication system includes these controlling processes of timing start/stop, oil-level and pressure warming, automatic supply of lubricant to the tank, and so on. The demands of automatic lubricating and automatic supply of lubricant were satisfied. The research provides a foundation for the practice of the centralized lubrication system of 125MN extruder, improvement of the operational efficiency as well as reducing wear.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]朱明,谭建平,周俊峰.125MN挤压机监控系统设计研究[J].锻压技术,2008,33(3):109-111.
[2]沈利亚.集中自动润滑系统介绍[J].地质装备,2006,7(2):19-22.
[3]梅金波,周兰堑,胡乾江.常见干油集中润滑系统分析[J].浙江冶金,2005,(4):20-23.
[4]李柱国.机械润滑与诊断[M].北京:化学工业出版社,2005.
[5]洪建荣.典型干油集中润滑系统分析及维护[J].南方金属,2006,(3):50-53.
[6]王成勇,杨惠君.与机械要求相匹配的润滑系统设计[J].润滑与密封,2006,(2):187-191.
[7]盛奎川,钱湘群,宋慧芝.车辆底盘自动集中润滑系统的控制方法及技术[J].农业机械学报,2005,36(8):30-33.
[8]万福君,潘松峰,张洪信,等.单片微机原理系统设计与应用[M].合肥:中国科技大学出版社,2003.
[9]张让莘.基于单片机的自动化炊事锅监控系统研发[J].武汉理工大学学报,2008,30(2):146-148.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
