|
电机定、转子双排自动叠装硬质合金级进模设计
|
|
英文标题：Design of double-stacked and progressive carbide die for automatic stacking motor stator and rotor |
|
作者：周慧兰 |
|
单位：华东交通大学机电工程学院 |
|
关键词：电机定转子 双排 自动叠装 自动计数分离 |
|
分类号：TG385.2 |
|
出版年,卷(期):页码：2009,34(3):106-109 |
|
摘要：
|
|
在对电机定、转子冲片加工工艺分析的基础上,确定了双排错位的排样方案,设计了定、转子冲片同模套冲、自动叠装的级进模。在模具设计中,通过落料转子扭斜机构实现转子自动叠装,应用叠片自动计数分离机构实现了叠片的自动记数。该模具可有效解决定、转子冲片叠铆加工费时、费工、质量低的问题。
|
|
Based on the analysis of the processing technology in blanking motor stator and rotor, the way of sheet layout was arranged in double-stacked and a progressive die for co-blanking rotor and stator was designed with automatic stacking technology. In the mold design, by means of twist blanking agency rotor automatic stacking was realized, and automatic counting and separating were finished by automatic counting agency. The problem of time-consuming, work-consuming and poor quality in automatic stacking was resolved efficiently.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]陈炎嗣.多工位级进模设计与制造[M].北京:机械工业出版社,2006.
[2]王孝培.冲压手册[M].北京:机械工业出版社,2005.
[3]杨建华,林元,张源,等.硬质合金模具的设计与制造[J].模具制造,2005,(11):29-32.
[4]欧阳波仪,成百辆.电机定转子冲片自动叠铆级进模设计[J].模具工业,2006,(1):31-34.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
