|
2A12铝合金薄壁壳体的近净成形加工技术研究
|
|
英文标题：Study on near-net-shape forming process of thin-wall shell body made for 2A12 aluminium alloy |
|
作者：伍太宾 孔凡新 赵治国 |
|
单位：南京工程学院材料工程学院 |
|
关键词：2A12铝合金 薄壁壳体 近净成形 温挤压 温冲压 |
|
分类号：TG376.3 |
|
出版年,卷(期):页码：2009,34(4):105-109 |
|
摘要：
|
|
采用温挤压制坯与温冲压成形相结合的近净成形加工技术,对壁薄且外形复杂的2A12铝合金小型外壳体进行精密成形加工。将圆柱体坯料放入箱式加热炉内加热至(400±20)℃并保温一定时间,用猪油作润滑剂,在YX32-100型四柱液压机上进行温挤压制坯,然后在J23-63型冲床上进行温冲压成形。成形加工的2A12铝合金薄壁外壳体锻件,其内腔表面粗糙度达到Ra0.8～1.6,内腔侧壁与底面的圆角小于R0.2 mm,内腔尺寸精度高且一致性好,无砂眼、毛刺、裂纹和折叠等缺陷;锻件除两端面留有加工余量外,其余部分不再后续切削加工就可以达到外壳体零件的尺寸精度、表面质量和形位公差等要求。
|
|
The near-net-shape forming process of warm extrusion and warm stamping was employed to manufacture the precision forgings for the complex and thin-wall shell body made of 2A12 aluminium alloy.By heating cylinder billets under the condition of heating temperature of(400±20)℃ and heating-up for a period of time,employing the lard to lubricate the die,the perform was done by warm extruding on the YX32-100 four-column hydraulic press and forgings were made by warm stamping on J23-63 C-frame press.The forgings by this near-net-shape forming process not only has lower surface roughness,higher dimensional accuracy and dimensional stability,but no defect,such as sand hole,overlap,crack and flash etc..The forgings can be satisfied with the technical data,such as surface quality,dimensional accuracy and fitting tolerance,etc.,except for small post machining of both ends of the forgings.
|
|
基金项目：
|
|
南京工程学院引进人才科研启动基金项目(KXJ08137)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]《有色金属及其热处理》编写组.有色金属及其热处理[M].北京:国防工业出版社,1981.
[2]薛永春.金属等温变形工艺[M].北京:机械工业出版社,1992.
[3]吴诗淳.冷温挤压技术[M].北京:国防工业出版社,1995.
[4]张质良.温塑性成形技术[M].上海:上海科学技术文献出版社,1986.
[5]林新波,王艺,张质良,等.铝合金自行车后花毂锻件温挤压成形技术研究[J].锻压技术,2008,15(4):157-161.
[6]王真,单德彬,薛克敏,等.筒形机匣等温精锻时模具的加热及有限元热场分析[J].锻压技术,1996,21(4):45-49.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
