|
负间隙精冲的大变形弹塑性有限元分析
|
|
英文标题：FEM analysis of large elasto-plastic deformation for fine-blanking with negative clearance |
|
作者：李建华 张忠美 |
|
单位：中原工学院机电学院 |
|
关键词：负间隙 弹塑性有限元 精密冲裁 韧性断裂 |
|
分类号：TG386.2 |
|
出版年,卷(期):页码：2008,33(5):167-170 |
|
摘要：
|
|
负间隙精密冲裁是一个复杂的力学过程,涉及弹性变形、塑性变形、损伤软化和韧性断裂等现象。本文使用DEFORM-2D软件对AISI-1045钢进行了弹塑性大变形有限元数值模拟,将McClintock断裂准则应用于负间隙精冲韧性断裂的预测中,预测了材料变形过程中的静水应力、等效应力和等效应变的分布以及发展趋势。并依据仿真条件和模拟结果分析,通过实验的方法获得了不同负间隙下的无毛刺冲裁件。
|
|
Fine-blanking with negative clearance is a complex mechanics process,it relates to the phenomena of elastic deformation,plastic deformation,damnification inteneratation,ductile fracture and so on.By using DEFORM-2D software and McClintock ductile fracture criteria,the process simulation for AISI-1045 steel was done with large deformation elasto-plastic FEM.The distributions and developing trends of static hydraulic pressure,equivalent stress,and equivalent strain were predicted.According to the analysis of the simulative conditions and the simulative results,the no burr specimens with the different negative clearances were obtained by the way of experiment.
|
|
基金项目：
|
|
河南省科技厅基础研究项目(0311051000)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]李建华,范为福,杜虹.无飞边冲孔瞬时间隙及塑性状态研究[J].中国机械工程,2002,13(12):1065-1066.
[2]范为福,黎刚生,乔国谦.AISI-1045、1025钢的冲裁模拟[J].锻压技术,2007,32(4):120-124.
[3]Klocke F,Sweeney K,Raedt H W.Improved tool design forfine blanking though the application of numerical modelingtechniques[J].Journal of Materials Producing Technology,2001,(115):70-75.
[4]Kwak T S,Kim Y J,Bae W B.Finite element analysis on theeffect of die clearance on shear planes in fine blanking[J].Journal of Materials Producing Technology,2002,(130-131):462-468.
[5]李尚健.金属塑性成形过程模拟[M].北京:机械工业出版社,1999.
[6]温彤,廖林灿,张湘伟.金属剪切过程的理论研究状况[J].锻压技术,2000,25(3):44-47.
[7]孙希延,施浒立,纪元法,等.板料拉深成形数值模拟关键算法的比较[J].锻压技术,2006,31(2):19-22.
[8]涂光祺.精冲技术[M].北京:机械工业出版社,1999.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
