网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
基于有限元分析的液压机上横梁结构改进设计
英文标题:Structure improvement design for upper beam of forging machine based on FEA
作者:骆念武 申远 竺长安 王玉山 邓伟平  
单位:中国科学技术大学精密机械与精密仪器系 合肥锻压集团  
关键词:锻压机  有限元分析  横梁结构 
分类号:TG315
出版年,卷(期):页码:2009,34(1):119-121
摘要:
针对某型号锻压机床在工作过程中的不稳定问题进行分析,改进设计方案,达到增强锻压机床上横梁的结构稳定性以及减轻其重量的目的。采用有限元分析模式及ANSYS-Workbench软件,对锻压机的上横梁进行静态有限元分析,得到应力和应变分布云图及应力集中和最大变形的位置。根据分析结果进行强度校核和结构改进,再次进行有限元分析,验证改进的可行性。比较两次分析结果,达到了减小上横梁横向变形差,即增强稳定性的目的,以及减轻了上横梁的重量。
The problem that the forging machine was unstable during the work was analyzed.By improved methods,the way to make the upper beam of forging machine more stable,and to reduce the weight of the upper beam was found.The analysis-improve-analysis-compare finite element analysis model was applied.Through the FEA static analysis on the upper beam of forging machine with ANSYS-Workbench software,the distribution of stress and strain and the points of stress concentration and maximum deformation were obtained.According to the analysis results,strength inspection and structure improvement were executed,then the FEA static analysis was made again to prove the feasibility of the method.Compared with the original result,the poor deformation manner of the upper beam was less and the weight of the upper beam was also reduced.
基金项目:
作者简介:
参考文献:
[1]秦东晨,祁建中.液压机横梁结构的优化设计[J].锻压技术,2004,30(2):49-52.
[2]侯晓望,童水光.基于有限元分析的液压机结构优化[J].重型机械,2005,(4):46-48.
[3]余联庆,梅顺齐.ANSYS在结构优化设计中的应用[J].中国水运,2007,(3):76-77.
[4]俞新陆.液压机的设计与应用[M].北京:机械工业出版社,2006.
[5]詹友刚.Pro/ENGINEER 2001快速入门教程[M].北京:机械工业出版社,2006.
[6]洪庆章.ANSYS7.0教学示范[M].北京:中国铁道出版社,2003
[7]Tirupathi R C,Ashok D B.工程中的有限元方法[M].北京:清华大学出版社,2006.
服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9