|
摘要：
|
|
利用Dyanform对拼焊板盒形件进行冲压成形数值模拟,研究不同压边力对拼焊板盒形件拉深过程中破裂危险点应变路径和成形性能的影响规律;同时,提出台阶式变压边力控制方法。结果表明:通过调整压边力的大小和变化方式,可以实现对拼焊板盒形件破裂危险点处应变路径的控制以及减小焊缝移动,从而提高拼焊板盒形件的冲压成形性能。
|
|
The drawing of tailor welded blanks box was simulated by Dynaform.The influence of holding blank force(HBF) on the strain path of the dangerous point and the formability was researched,and the setback HBF was offered.The results show that the strain path of dangerous point can be controlled and the movement of weld line can be reduced through adjusting the quality and changing style of HBF,so the formability of tailor welded blank box is improved.
|
|
基金项目：
|
|
辽宁省博士启动基金资助项目(20071066)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]陈炜,杨继昌,林忠钦.拼焊板覆盖件成形过程中的焊缝移动和成形性能[J].机械工程学报,2004,40(9):62-66.
[2]姜银方,杨继昌,陈炜.拼焊板冲压成形研究的现状和发展趋势[J].汽车工程,2003,25(4):410-414.
[3]陈炜,杨继昌,林忠钦.拼焊板在车身覆盖件制造中的应用[J].汽车工程,2003,25(1):82-87.
[4]郝长岭,周贤宾.拼焊板成形极限研究进展[J].锻压技术,2006,31(3):19-22.
[5]Rao U S,Chaturvedi R C,Dutta S P.Forming limits undercomplex deformation paths-comparison of theoretical and ex-perimental results[A].The 10thall India Machine Tool De-sign and Research Conference[C].Durgapur,India,1982.
[6]Kikuma T,Nakazima K.Effect of deforming conditions andmechanical properties on the stretch forming limits of sheet[A].The 4thBiennial IDDRG Congress[C].Tokyo,Japan,1970.
[7]方井柱,陈炜,袁国定,等.差厚拼焊板拉延反鼓包方盒件的成形性研究[J].塑性工程学报,2003,10(3):26-29.
[8]Si Junhe,Wu Xin.Formability enhancement for tailor-weldedblank using blank holding force control[J].Journal of Manufac-turing Science and Engineering,2003,125(1):461-467.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
