|
摘要：
|
|
板料弯曲后产生的回弹对冲压件的精度影响较大,用数值模拟对弯曲回弹进行精确预测具有非常重要的意义。本文利用ANSYS/LS-DYNA非线性动力有限元程序的显式-隐式连续求解功能,模拟了超级钢板料弯曲成形和卸载后板料回弹变形的过程,得到了超级钢板料在不同凸模圆角半径和模具间隙下弯曲成形后的回弹结果,将模拟计算的结果与实验数据对比,验证了计算结果的准确性。
|
|
Springback of bending sheet greatly affects the precision of stamping part.So it is very important for us to have a precision forecast of the springback in numerical simulation.Based on the theory of elastic-plastic and non-linear finite element,the super steel sheet bending process and the uninstalled rebounding distortion process were simulated by the explicit-implicit continuous solving function of ANSYS/LS-DYNA non-linear and dynamic finite program.The super steel sheet was bended by different radius of the punch and different punch-and-die clearances.The result of springback was obtained.By comparison of experimental and calculated results,the accuracy of the calculated results is verified.
|
|
基金项目：
|
|
国家高技术研究发展计划(863计划)项目(2003AA33G010)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Gholinia,Humphreys F J,Prangnell P B.Processing to ul-trafine grain structures by conventional routes[J].MaterialsScience and Technology,2000,16(11-12):1251-1255.
[2]Liu X H,Wang G D.New Generation plain steel in China-present situation and development foreground[A].Proceed-ing of Symposium on Development of Advanced Steel[C].Shengyang:Northeastern University,2003.
[3]Zhou D,Wagoner R H.Development and application ofsheet-forming simulation[J].Journal of Materials ProcessingTechnology,1995,50(1):1-16.
[4]Karafillis A P,Boyce M C.Tooling design in sheet metalforming using springback calculations[J].Int.J.Mech.Sci.,1992,34(2):113-131.
[5]Makinouchi A.Sheet metal forming simulation in industry[J].Journal of Materials Processing Technology,1996,60(1-4):19-26.
[6]王勖成.有限单元法基本原理和数值方法[M].北京:清华大学出版社,2001.
[7]赵海鸥.LS-DYNA动力分析指南[M].北京:兵器工业出版社,2003.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
