|
差厚拼焊板拉深方盒形件成形极限及焊缝移动
|
|
英文标题：Forming limit and weld seam movement of TWBs with different thicknesses in square cup |
|
作者：崔令江 刘发 黄永生 |
|
单位：哈尔滨工业大学(威海)材料学院 |
|
关键词：拼焊板 数值模拟 成形极限 |
|
分类号：TG386 |
|
出版年,卷(期):页码：2009,34(2):57-60 |
|
摘要：
|
|
采用Dynaform专业板料成形软件,对差厚异质激光拼焊板拉深方盒形件的成形过程进行了研究。结果表明:母材厚度差对压边力的合理范围以及盒形件的成形极限和焊缝移动量有很大的影响;两种母材所占比例不同(焊缝位置变化)时,比例差别越大,成形极限越小,薄侧材料所占比例越大,焊缝移动量也越大。并根据两种母材在成形过程中的应力状态和应变状态分析了这些现象。
|
|
The drawing process of square cup using laser TWBs(tailored welding blanks) in different thicknesses and materials was studied using Dynaform,a professional software on sheet forming.The results show that the thickness difference of the two parts has significant influence on reasonable ranges of binder forces,forming limit and weld seam movement.When the proportion of the two parts(the position of weld seam) is changed,the larger the difference of proportions is,the less the forming limit will be,the more the proportion of the thinner part is,the more the weld seam movement will be.These above phenomenons were explained according to the stress and strain state of the two parts in forming process.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]王婷婷.轿车用激光拼焊板冲压成形性研究[D].长春:吉林大学,2006.
[2]Anand D,Chen D L,Bhole S D,Fatigue behavior of tailor(laser)-welded blanks for automotive applications[J].Materi-als Science and Engineering,2006,420(1-2):199-207.
[3]Kinsey Brad,Liu Zhihong,Cao Jian.Novel forming technol-ogy for tailor-welded blanks[J].Journal of Materials Pro-cessing Technology,2000,99(1):145-153.
[4]郝长岭,周贤宾.拼焊板成形极限研究进展[J].锻压技术,2006,31(3):19-22.
[5]孙大勇.轿车用拼焊板工艺与成形性能的研究[J].哈尔滨:哈尔滨工业大学,2003.
[6]郭伟刚,陈炜林,张家骅.差厚激光拼焊板盒形件的数值模拟研究[J].新技术新工艺,2006,41(4):4-6.
[7]邱小刚,陈文龙.激光拼焊板冲压成形的数值模拟研究[J].钢铁矾钛,2006,(2):44-47.
[8]王永志,杨玉英,金朝海.方盒件拉深法兰区不均匀流动的模拟分析[J].材料科学与工艺,2004,12(1):99-102.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
