|
摘要：
|
|
基于UGNX平台开发了覆盖件修边与翻边工序快速仿真系统(TFA)。该系统基于有限元逆算法,根据翻边形状反向快速计算修边线尺寸以及翻边成形中可能出现的起皱和破裂等缺陷。由于修边线展开与翻边分析无缝集成UGNX中,避免了CAD与CAE系统数据转换时模型数据丢失和精度损失,缩短了工艺设计周期,为工艺设计人员提供一种方便的修边和翻边快速仿真工具。以汽车后围修边线展开与翻边成形为例,通过TFA计算结果与实验结果的比较,验证了TFA系统算法的可行性与精确性。
|
|
The trimming line and flanging analysis system(TFA) of sheet metal forming was developed on UGNX platform.Based on the inverse approach,the trimming line and the formability of the sheet metal at local flanging area could be predicted from the geometry of the designed part.The seamless operation of flanging analysis in the modeling platform of UGNX could avoid the switch time and data precision loss between the CAE and CAD systems. The system could work as an assistant tool for product design engineers and process engineers,to predict and optimize the flanging process at the preliminary design stage.To verify the accuracy and efficiency of TFA,local trimming and flanging on a fender part of auto panel were presented and the numerical results were compared with those obtained by experiments.
|
|
基金项目：
|
|
国家自然科学基金资助项目(50575080);;
国家科技支撑计划资助项目(2006BAF01A43)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]纪莲清,谢欢.内孔翻边时变形区应力应变规律研究[J].锻压技术,2007,32(1):20-23.
[2]Hu P,Li D Y,Li Y X.Analytical models of stretch and shrinkflanging[J].Int.J.Mach.Tools and Manufacture,2003,43:1367-1373.
[3]Haydar Livatyali,Gary L Kinzel,Taylan Altan.Computer ai-ded die design of straight flanging using approximate numerical a-nalysis[J].J.Mates.Proc.Tech.,2003,142:532-543.
[4]Xu Feng,Lin Zhongqin,Li Shuhui,et al.Study on the influ-ences of geometrical parameters on the formability of stretchcurved flanging by numerical simulation[J].J.Mates.Proc.Tech.,2004,145:93-98.
[5]胡平,刘海鹏,柳玉起.厚钣金件压弯翻边与回弹的数值研究[J].固体力学学报,2002,23(1):72-80.
[6]Huang You-Min,Chien Kuo-Hsiung.The formability limita-tion of the hole-flanging process[J].J.Mates.Proc.Tech.,2001,117:43-51.
[7]漆伟,韩利芬,钟志华.汽车覆盖件翻边工序的CAE仿真及应用[J].计算机仿真,2003,20(12):104-106.
[8]Guo Y Q,Batoz J L,Detraux J M,et al.Finite element proce-dures for strain estimations of sheet metal forming parts[J].Int.J.Numer.Meth.Eng.,1990,30:1385-1401.
[9]Liu Yuqi,Li Zhigang,Yan Yakun.Fast accurate prediction ofblank shape in sheet metal stamping forming[J].ACTA Me-chanica Solida Sinica,2004,17:36-42.(第十届全国塑性工程学术年会论文选登)
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
