|
摘要：
|
|
以环形座锻件为例,采用实验研究和有限元数值模拟相结合的方法研究了复杂盘饼类铝合金锻件等温成形时缺陷产生的机理。结果表明:采用反挤变形方式可以控制金属的径向流动速度,能有效地防止复杂盘饼类铝合金锻件的径向折叠和穿流缺陷的发生;各区域金属分配不合理会使局部区域因缺少金属而引起充不满或对流折叠,或使局部金属过多引起折叠;增大镦粗时坯料与模具间的摩擦阻力和变形量,可使坯料获得更好的径向分布的流线,最终得到流线分布合理的锻件。
|
|
The forging of rotating seat was applied to study the mechanism of defects happened in isothermal forging of aluminum alloy disk forging with complex shape by combining experiment with FEM(finite element method).The results show that the flow velocity of metal in radial direction can be controlled by using backward extrusion,which can prevent radial folding and fibre breaking of aluminum alloy disk forging with complex shape.The irrational distribution of metal in different regions of billet will result in under filling or convective folding because of lacking metal in local region,or will result in folding because of superabundance metal in local region.In upsetting,increasing friction resistance between bar and moulds and deformation ratio can make the flow lines distribute well along the billet,which can gain forging with rational distributed flow lines.
|
|
基金项目：
|
|
国家自然科学基金资助项目(50775051)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Siegert K,Kammerer M,Keppler-Ott Th,et al.Recent de-velopments on high precision forging of aluminum and steel[J].Journal of Materials Processing Technology,1997,71(1):91-99.
[2]Shan Debin,Xu Wenchen,Lv Yan.Study on precision forg-ing technology for a complex-shaped light alloy forging[J].Journal of Materials Processing Technology,2004,151(1-3):289-293.
[3]Yoshi mura Hyoji,Tanaka Katsuhisa.Precision forging of a-luminumand steel[J].Journal of Materials Processing Tech-nology,2000,98(2):196-204.
[4]吕炎.锻压成形理论与工艺[M].北京:机械工业出版社,1991.
[5]阿尔坦T.现代锻造[M].陆索,吴世德,李成功,等译.北京:国防工业出版社,1982.
[6]Son I H,Han Y W,Ki m HS,et al.Modified looping tech-nique for remeshing of forming si mulations with free surfacefolding[J].Journal of Materials Processing Technology,2003,140(1-3):465-470.
[7]刘国晖.大型板类锻件的锻造[J].锻压技术,2005,30(2):4-6.
[8]Poursina M,Parvizian J,Antonio C A C.Opti mumpre-formdies intwo-stage forging[J].Journal of Materials ProcessingTechnology,2006,174(1-3):325-333.
[9]Lu Cheng,Zhang Li wen.Numerical si mulation on forgingprocess of TC4 alloy mounting parts[J].Transactions ofNonferrous Metals Society of China,2006,16(6):1386-1390.
[10]Park J J,Hwang HS.Preformdesignfor precisionforging ofan asymmetric rib-webtype component[J].Journal of Mate-rials Processing Technology,2007,187-188:595-599.
[11]何利东,张光明.模拟技术在大型锻件工艺改进方面的应用[J].锻压技术,2006,31(6):12-16.
[12]曹秀中.就拉杆固定支架谈锻件的缺陷分析[J].锻压技术,2007,32(2):19-21.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
