|
大型筒体件锻造工艺的常温实验室模拟研究
|
|
英文标题：Lab simulation research on process for large tubular forgings |
|
作者：何利东 |
|
单位：四川工程职业技术学院材料系 |
|
关键词：大型筒锻件 扩孔 模拟 |
|
分类号：TG316 |
|
出版年,卷(期):页码：2008,33(5):23-27 |
|
摘要：
|
|
参照实际核电压力壳(RPV)大型筒体锻件扩孔工艺,在常温下用金属铅材料设计成一组缩小比例尺寸的筒体试件,使用实验室30 t万能材料试验机缓慢加压变形。模拟研究了大型筒体件扩孔工序的变形规律,定量绘出了模拟变形试件中等效应变EI等值线分布图,总结出扩孔变形分区的典型特征,研究了不同筒体件形状因子、宽窄砧、不同扩孔压下率对扩孔变形的影响,首次从应变场角度得出了最佳扩孔形状因子,其值为0.95。研究结果对实际核电压力壳RPV生产有重要参考价值。
|
|
Simulation technique for deformation theory research of enlarging large tubular forgings was investigated.Referring to an actual enlarging process in manufacturing RPV,through a group of reduced-size specimens,slowly compressed them by a 30 t versatile material tester in laboratory at normal temperature.The equivalent-strain EI isographs was got quantitatively for the process,the typical strain area distribution feature in a enlarging process was deduced,and an effect of tubular shape-factor,anvil width,reducing rate were revealed.For the first time,the most optimized tubular shape-factor of 0.95 was deduced at a point of strain field.The result provides an important reference for a possible application in actual RPV manufacture.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]何利东,张光明.模拟技术在大型锻件工艺改进方面的应用[J].锻压技术,2006,31(6):12-16.
[2]陈森灿,何利东.改善核电筒体大锻件树枝晶偏析的模拟研究[J].锻压技术,1993,18(1):9-12.
[3]陈森灿,杨宝森.大型锻件镦粗变形规律的综合研究[J].锻压技术,1991,16(1):7-13.
[4]张志文.锻造工艺学[M].1版.北京:机械工业出版社,1983.
[5]陈森灿,孙世济,张伟林,等.镦粗模拟试验中孔洞闭合规律与塑性有限元计算[J].模具技术,1987,(3):1-9.
[6]陈森灿,杨宝森.计算机在座标网格法处理大变形问题中的应用[J].模具技术,1990,(1):6-12
[7]李尧.金属塑性成形原理[M].1版.北京:机械工业出版社,2006.
[8]张光明,何利东.基于DEFORM 3D的铝型材挤压过程数值分析[J].四川工程职业技术学院学报,2006,31(2):3-6.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
