锻压技术

纵向内筋薄壁筒反向滚珠旋压成形机理研究

英文标题：Study of deformation mechanism of backward ball spinning of thin-walled tube with longitudinal inner ribs

作者：江树勇顾卫东李春峰张军

单位：哈尔滨工程大学工程训练中心哈尔滨飞机工业集团哈尔滨工业大学材料科学与工程学院

关键词：滚珠旋压强力旋压纵向内筋薄壁筒

分类号：TG376

出版年,卷(期):页码：2008,33(5):88-91

摘要：

作为一种连续局部塑性成形工艺,反向滚珠旋压被应用于成形带有纵向内筋的薄壁筒形件。反向滚珠旋压使变形区金属处于三向压应力状态,有利于内筋的形成。以塑性屈服准则、最小阻力定律和局部塑性成形理论为基础,将筒坯沿周向变形区分为接触区和前区,通过滚珠沿周向运动的4个阶段,给出了接触区和前区的应力应变状态,分析了内筋的成形过程,最后揭示了旋压件内筋的成形机理。

As a successively and locally plastic deformation process,backward ball spinning was applied to forming thin-walled tubular part with longitudinal inner ribs.During backward ball spinning,the metal in the deformable zone was caused to be in a three-compressive stress state which contributed to formability of the inner ribs.Based on plastic yield criterion,minimum resistance law and local plastic forming theory,the deformation zone along the circumferential direction of the tubular blank was divided into the contact zone and the front zone in which the stress and strain state was given,and the forming process of the inner ribs was analyzed by means of four stages where ball moved along the circumferential direction.In the end,deformation mechanism of the inner ribs of the spun part was revealed.

基金项目：

黑龙江省留学归国基金项目资助(lc01c13)

参考文献：

[1]张艳秋,徐文臣,单德彬,等.薄壁铝合金封头旋压成形工艺研究[J].锻压技术,2006,31(3):74-78.
[2]张利鹏,刘智冲.筒形件强力旋压工艺参数选取方式分析[J].锻压技术,2006,31(1):43-45.
[3]江树勇,薛克敏,李春峰,等.铝合金薄壁筒形件滚珠旋压成形分析[J].锻压技术,2005,30(4):24-26.
[4]江树勇,薛克敏,李春峰,等.基于神经元网络的薄壁筒滚珠旋压成形缺陷诊断[J].锻压技术,2006,31(3):79-83.
[5]Jiang Shuyong,Li Ping,Xue Kemin.Application of BPANNin spinning deformation of thin-walled tubular parts with longi-tudinal inner ribs[J].Journal of Central South University ofTechnology,2004,11(1):27-30.
[6]Jiang Shuyong,Xue Kemin.Process factors influencing spin-ning deformation of thin-walled tubular part with longitudinalinner ribs[J].Transactions Nonferrous Metals Society ofChina,2004,14(4):702-707.
[7]Jiang Shuyong,Xue Kemin,Li Chunfeng.Spinning deforma-tion criteria of thin-walled tubular part with longitudinal innerribs[J].Journal of Wuhan University of Technology-Mater.Sci.Ed.,2006,21(4):169-172.
[8]黄汉辉.空调器用无缝内螺纹紫铜盘管的开发[J].上海有色金属,1996,17(1):17-24.
[9]阎雪峰,曹跃进.紫铜内螺纹管高速度旋压成型装置[J].重型机械,2000,(2):13-14.
[10]George E Dieter.Mechanical Metallurgy[M].北京:清华大学出版社,2006.
[11]斯德洛日夫,波波夫.金属压力加工原理[M].王仲仁,霍文灿,郭殿俭,等译.北京:机械工业出版社,1980.
[12]吕炎.锻压理论成形与工艺[M].北京:机械工业出版社,1991.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】