|
摘要：
|
|
综述了异步轧制技术的原理、特点、研究及应用情况。从开展镁合金塑性加工新技术的研究出发,论述了目前变形镁合金异步轧制研究的情况,分析了异步轧制过程中镁合金的晶粒细化机理、变形机理及其织构等的变化规律。异步轧制可减弱镁合金板材的基面织构,使其晶粒得到细化,提高其力学性能。指出如果异步轧制技术能够成功地应用于镁合金的塑性成形,镁合金将具有越来越广阔的实际应用前景。
|
|
The basic principle,characteristics,present researches and applications of differential speed rolling technology were reviewed.From the view-point of new technics of plasticity processing magnesium alloys,the application of differential speed rolling technology in wrought magnesium alloy was discussed,and the mechanism of grains refinement,deformation mechanism,rules of texture variation,and so on were analyzed.Differential speed rolling technology can weaken basal texture of magnesium alloy sheets,fine grains and improve mechanical properties.It puts forward that magnesium alloy will have a better actual application future if differential speed rolling technology is applied successfully in the plastic forming.
|
|
基金项目：
|
|
湖南省教育厅科研资助项目(06c031);;
湖南省科技计划项目(2007FJ3095);;
湖南省自然科学基金资助项目(07JJ3092)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]王渠东,丁文江.镁合金及其成形技术的国内外动态与发展[J].世界科技研究与发展,2004,26(3):39-46.
[2]Pol mear I J.Magnesiumalloys and application[J].Mater.Sci.Tech.,1994,10(1):1-6.
[3]Mordike B L,Ebert T.Magnesium:properties-applications-potential[J].Mater.Sci.Eng.,2001,A302(1):37-45.
[4]余琨,黎文献,王日初,等.变形镁合金的研究、开发及应用[J].中国有色金属学报,2003,13(2):277-288.
[5]陈维平,詹美燕,陈宛德,等.变形镁合金的塑性加工技术研究及展望[J].特种铸造及有色合金,2007,27(1):40-43.
[6]陈彬,林栋樑,曾小勤,等.AZ31镁合金大压下率轧制的研究[J].锻压技术,2006,31(3):1-3.
[7]咸奎峰,张辉,陈振华.AZ31镁合金板温拉深流变应力行为研究[J].锻压技术,2006,31(3):46-49.
[8]周涛,陈振华,程永奇.通道间隙对等径角轧制AZ31镁合金板材组织与性能的影响[J].锻压技术,2007,32(1):32.
[9]王新,王迎新,曾小勤,等.数值模拟方法建立AZ31B镁合金管材的挤压极限图[J].锻压技术,2007,32(1):99.
[10]Poss R.Sheet metal production of magnesium[J].MaterialsScience Forum,2003,419-422(1):327-336.
[11]张青来,卢晨,朱燕萍,等.轧制方式对AZ31镁合金薄板组织和性能的影响[J].中国有色金属学报,2004,14(3):391-397.
[12]Perez-Prado M T,Valle J A,Contreras J M,et al.Micro-structural evolution duringlarge strain hot rolling of an AM60Mg alloy[J].Scripta Materialia,2004,50(5):661-665.
[13]Valle J A,Prado M T,Ruano O A.Texture evolution dur-ing large-strain hot rolling of the AZ61 Mg alloy[J].Materi-als Science and Engineering,2003,A355(1-2):68-78.
[14]Kalidindi S R.Modeling anisotropic strain hardening and de-formation texturesinlowstackingfault energy materials[J].International Journal of Plasticity,2001,17(6):837-860.
[15]Agnew S R,zg櫣r D.Plastic anisotropy andthe role of non-basal slipin magnesiumalloy AZ31B[J].International Jour-nal of Plasticity,2005,21(6):1161-1193.
[16]Tzoua G Y,Huang M N.Study on the mini mumthicknessfor the asymmetrical PVcold rolling of sheet[J].Journal ofMaterials Processing Technology,2000,105(3):344-551.
[17]Gao H,RamalingamS C,Barber G C,et al.Analysis of a-symmetrical cold rolling with varying coefficients of friction[J].Journal of Materials Processing Technology,2002,124(1-2):178-182.
[18]吕爱强.异步轧制对高纯铝箔织构的影响[D].沈阳:东北大学,2003.
[19]朱泉.异步轧制实验研究[J].钢铁,1980,15(6):1-5.
[20]胡东福.异步轧制技术[J].金属世界,1994,(4):15.
[21]李尧.异步轧制对3004铝合金变形织构及制耳率的影响[J].中国有色金属学报,1997,7(2):113-117.
[22]刘京华,张文刚,郭元杰.大辊径差型钢轧制的生产实践及其内在规律[J].首钢科技,1995,(5):4-9.
[23]于九明,于大克,穆晓森,等.大延伸异步连轧实验研究[J].钢铁,1999,34(2):29-31.
[24]崔玉所.异步轧制取向硅钢薄带再结晶的研究[D].沈阳:东北大学,2000.
[25]刘燕声,赵骧.工业纯铜的异步冷轧及再结晶织构研究[J].金属学报,1990,26(3):B198-B202.
[26]刘刚,王福,齐克敏,等异步轧制取向硅钢中织构沿板厚的分布与发展[J].金属学报,1997,33(4):364-369.
[27]高秀华,齐克敏,叶何舟,等.异步轧制对硅钢极薄带三次再结晶的影响[J].材料科学与工艺,2005,13(4):384-386.
[28]Hwang Y M,Tzou G Y.Analytical and experi mental studyon asymmetrical sheet rolling[J].Int.J.Mech.Sci.,1997,39(3):289-303.
[29]刘刚,齐克敏,王福,等.异步轧制速比对3%硅钢织构转变的影响[J].金属学报,1998,34(4):400-405.
[30]刘刚,齐克敏,贺会军,等.异步轧制取向硅钢的织构形成与转变机理[J].钢铁研究学报,1999,11(10):30-33.
[31]吕爱强,蒋奇武,王福,等.异步轧制对高纯铝箔冷轧织构的影响[J].金属学报,2002,38(9):974-978.
[32]Ki m S H,You B S,Yi m C D,et al.Texture and micro-structure changes in asymmetrically hot rolled AZ31 magnesi-umalloy sheets[J].Materials Letters,2005,59(29-30):3876-3880.
[33]Watanabe H,Mukai T,Ishikawa K.Effect of temperatureof differential speed rolling on room temperature mechanicalproperties andtexturein an AZ31 magnesiumalloy[J].Jour-nal of Materials Processing Technology,2007,182(1-3):644-647.
[34]Lee S H,Lee D N.Analysis of deformation textures ofasymmetrically rolled steel sheets[J].International Journalof Mechanical Sciences,2001,43(9):1997-2015.
[35]钟家湘,郑秀华,刘颖.金属学教程[M].北京:北京理工大学出版社,1995.
[36]Ji Y H,Park J J,Ki m WJ.Finite element analysis of severedeformation in Mg-3Al-1Zn sheets through differential-speedrolling with a high speed ratio[J].Materials Science and En-gineering,2007,A454-455(4):570-574.
[37]Watanabe H,Mukai T,Ishikawa K.Differential speed roll-ing of an AZ31 magnesiumalloy and the resulting mechanicalproperties[J].Journal of Materials Science,2004,39(4):1477-1480.
[38]刘兴,陈振华,夏伟军,等.异步轧制对AZ31镁合金板材组织和性能的影响[J].热加工工艺,2006,35(20):22-25.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
