|
摘要：
|
|
针对构想的一种FCF(冲压和冷锻组合)加工工艺,用DEFORM-3D有限元软件对AL-1100薄板零件台阶孔的成形过程进行了数值模拟。分析了压边力的作用及其大小对这种复合台阶孔成形性能和成形质量的影响。提出了适用于这种冲锻组合工艺较为合理的压边条件,即采用刚性压边,压边力Q约为成形力P的一半,即Q=0.5P。并用该种铝板在液压机上进行了组合加工工艺试验的验证。
|
|
Aiming at a flow control forming(FCF) process which was newly conceived,in utilization of DEFORM-3D software,numerical simulation of deformation on stepped-hole of sheet metal was carried out.The function of the blank holder force(BHF)as well as its influence on the forming performance and forming accuracy of combined stepped-hole were analyzed.A preferable blank holder condition for this FCF process,which used rigid blank holder,was proposed.The value of blank holder force is about half of forming pressure,namely Q=0.5 P.Moreover,the blank holder condition is validated by technological experiments using Al plate on hydroforming machine.
|
|
基金项目：
|
|
江西省十五重点学科——材料加工工程学科建设资助项目
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]卢险峰.关于冲压工艺知识结构体系[J].兵器材料科学与工程,2003,26(5):158-161.
[2]卢险峰.再论冷锻工艺知识结构体系[J].兵器材料科学与工程,2005,28(2):67-70.
[3]Boljanovic Vukota.Sheet Metal Forming Processes and DieDesign[M].New York:Industrial Press Inc,2004.
[4]卢险峰.冲压工艺模具学(第2版)[M].北京:机械工业出版社,2006.
[5]张小光,钟志平,袁贺强,等.精冲复合工艺与FCF加工法的分析比较[J].锻压技术,2002,27(2):16-20.
[6]卢险峰,李湖峰,章跃荣,等.板金属台阶断面零件冲裁工艺与模具[P].中国专利:专利申请号:200610155419.X,专利公开号:CN.1974049A,2007-05.
[7]方刚,曾攀.金属板料冲裁过程的有限元模拟[J].金属学报,2001,37(6):653-657.
[8]Khelifa M,Oudjene M,Khennane A.Fracure in sheet metalforming:effect of ductile damage evolution[J].Computersand Structures,2007,85(3-4):205-212.
[9]Nobuo Hatanaka,Katsuhiko Yamaguchi,Norio Takakura,etal.Si mulation of sheared edge formation process in blankingof sheet metals[J].Journal of Materials Processing Tech-nology,2003,140(1-3):628-634.
[10]Farzin M,Javani H R,Mashayekhi M,et al.Analysis of blan-king process using various damage criteria[J].Journal of Materi-als Processing Technology,2006,177(1-3):287-290.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
