|
摘要：
|
|
对减速器的内齿轮及其模具建立弹塑性有限元模型,采用成形数值模拟分析对内齿轮冷挤压过程进行了模拟,得出了较为准确的成形应力分布;对应力结果进行分析,确定了应力集中的部位,从而找到了减少应力集中的办法,仿真结果和实际符合很好,较大程度地提高了模具的使用寿命。研究成果对冷挤压成形的有限元仿真以及塑性成形工艺控制和提高模具寿命具有指导意义。
|
|
Based on building the 3-D elasto-plastic FEA model on the internal gear of the speed reducer and its mould,the process of cold extrusion of the internal gear workpiece was simulated by the 3-D elasto-plastic FEA method,and the accurate distribution of forging stress was got.The results of stress distribution were analyzed,and the part of the stress concentratoin was obtained.A method of reducing the concentration of stress was found.The results of simulation make good agreement to the practice,and the serve life of the mold is prolonged obviously.This research plays a guiding role on the simulation of the cold extrusion, controlling of the technical parameter and improvement on the life of the module.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]李浩,夏华,张鈺成.摩托车齿轮端面离合器键齿精密模锻毛坯工艺和模具设计[J].金属成形工艺,1990,8(2):25-29.
[2]胡亚民.精密成形技术现状及其发展[J].锻压机械,1998,(3):20-23.
[3]胡建军.摩托车档位齿轮精锻盛开工艺优化[J].热加工工艺,2006,35(13):48-51.
[4]周立斌.摩托车带爪齿轮锻坯温挤压工艺研究[A].第七届全国锻压学术年会论文集[C].北京:航空工业出版社,1999.
[5]胡亚民.精密体积成形模具设计制造及其寿命[J].机械工艺师,2001,(2):32-34.
[6]魏志刚,汤文成,刘德仿.星形套冷挤压成形模具结构分析及优化[J].锻压技术,2006,31(4):59-63.
[7]Shinichiro Fujikawa,Hideo Yoshioka,Saburo Shimamura.Cold-and-warm-forging applications in automotive industry[J].Mate-rials of Processing Technology,1992,(35):317-342.
[8]Rajiv Shivpuri.Current advances in cold and warm forgingprocessing modeling techniques:selected[J].Materials Pro-cessing Technology,1994,(46):253-274.
[9]Wifi A S,Abdel-Hamid A,El-Abbasi N.Computer-aided e-valuation of workability in bulk forming processes[J].Mate-rials Processing Technology,1998,77:285-293.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
