|
摘要：
|
|
125 MN挤压机是目前我国最大吨位挤压机,本文阐述了对125 MN挤压机自动化控制系统改造的实施方案,介绍了整套系统的结构与软、硬件实现方法。系统主要包括监控界面模块、报警模块、数据处理模块、参数控制模块和用户权限模块,达到了数据处理速度快、系统结构可靠和扩充能力强的要求。最后设计了利用WinCC与PLC400进行高速数据通信的方法,采样周期突破了WinCC中的最快刷新周期250 ms的限制,达到10 ms,满足了特殊数据高速采集的要求。
|
|
125 MN extruding machine is the largest rated tonnage of all in our country at present.The implementing scheme of the automatic control system about 125 MN extruding machine was clarified,and the structure of the whole monitoring system and the realizable software and hardware method were introduced.The whole system,mainly including the controlling interface module,the warning module,the data processing module,the parameter and controlling module and the users′ authority module,could meet the requirements of rapid data process,reliable system structure and powerful extendable ability.Finally,the WinCC and PLC400 highspeed data communication method was designed and utilized.The sampling period broke through the most rapid refresh cycle 250 ms′s restriction of WinCC,and reached 10ms quickly,which had responded to the request that the special high-speed data should be gathered.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Adam G K.Design and control of a mechatronic hydraulicpress system[A].Proceedings of the IEEE InternationalConference on Mechatronics[C].Piscataway,NJ,USA:IEEE,2004.
[2]谭建平,周俊峰,黄长征.300MN模锻水压机操纵系统改造方案研究[J].机械科学与技术,2006,25(12):1408-1410.
[3]叶玮琼,林伟.组态软件在大型水压机控制系统的应用[J].中国仪器仪表,2004,(4):23-26.
[4]黄长征,谭建平.300MN模锻水压机自学习控制系统研究[J].微计算机信息,2006,22(7):39-41.
[5]谭建平,苏勇,周俊峰.300MN模锻水压机操纵系统复杂网络控制实现[J].锻压技术,2007,32(2):84-87.
[6]姜丽波,张根宝.WinCC高速数据采集应用[J].电气传动自动化,2006,28(2):41-43.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
