|
等温精密成形镁合金上机匣新工艺
|
|
英文标题：New process of isothermal precision forging of magnesium alloy engine case |
|
作者：黄延平 |
|
单位：长春工程学院机械电子工程系 |
|
关键词：镁合金机匣锻件 等温成形 |
|
分类号：TG316 |
|
出版年,卷(期):页码：2008,33(6):33-35 |
|
摘要：
|
|
针对直升机上机匣的复杂结构和其受力特点,以及加工制造中存在的问题,对此类锻件所使用的材料和加工工艺做了对比分析,建议此类锻件采用等温成形加工。确定了等温成形加工方案,设计出了所使用的模具。通过实际应用,证明该方案行之有效。
|
|
In view of the complex structure of helicopter engine case and its stress characteristic,as well as the problem in the manufacturing process,the material used and the process for this kind of forging were analyzed by contrast method.This kind of forging suited for the isothermal forging process was suggested.The isothermal forging process plan was scheduled and the mold to be used was designed.Through the practical application,this plan is proved to be effective.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Davey K,Ward M J.A practical method for finite elementring rolling simulation using the AL E flow formulation[J].International Jounal of Mechanical Science,2002,(44):165-190.
[2]许思广,姚开云.异形截面环件轧制过程的三维有限元分析[J].锻压机械,1994,(3):18-11.
[3]许思广,连家创.环件轧制的热刚塑性耦合有限元分析[J].机械工程学报,1994,30(2):87-91.
[4]郭正华,解春雷,李尚健.环件热轧动态过程有限元模拟[J].塑性工程学报,1999,6(2):21-25.
[5]李尚健.金属塑性成形过程模拟[M].北京:机械工业出版社,1999.
[6]沈俊峰,沈利群.提高模具材料疲劳抗力的途径[J].上海金属,1998,(2):19-22.
[7]徐耀坤.模具材料及热处理技术对模具寿命影响的研究[J].锻压技术,2002,27(4):62-64.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
