|
镁合金拼焊板冲压成形过程数值模拟
|
|
英文标题：Numerical simulation of magnesium alloy tailor-welded blank drawing |
|
作者：王忠堂 钱芳 |
|
单位：沈阳理工大学材料科学与工程学院 |
|
关键词：镁合金 拼焊板 冲压 数值模拟 |
|
分类号：TG386 |
|
出版年,卷(期):页码：2008,33(6):44-47 |
|
摘要：
|
|
借助MSC.Marc模拟软件,采用大变形弹塑性有限元法,建立了镁合金拼焊板筒形件冲压成形有限元模型,对相同厚度、不同成分的镁合金拼焊板冲压成形过程进行了数值模拟。得到了筒形件底部及侧壁法兰处焊缝移动规律;分析了压边力及板料初始温度对焊缝移动情况的影响。对于拼焊板冲压成形的研究具有一定意义。
|
|
Using MSC.Marc simulating software and adopting large elastic-plasticity finite element method(FEM),the model of magnesium alloy tailor-welded blank tube parts was established.The forming process was simulated.The effect of fixed holder force and initial temperature of blanks on the movement of welded seam of TWB with diffident materials and the same thickness was analyzed.The motional law of the weld seam on the bottom of the cup and the side wall was gained.The results might be significant for magnesium alloy tailor-welded blanks drawing.
|
|
基金项目：
|
|
国家自然科学基金资助项目(50775211)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]张津,章宗和.镁合金及应用[M].北京:化学工业出版社,2004.
[2]张士宏,王忠堂.镁合金板件温热成形技术的几个新进展[J].材料导报,2006,20(8):114-118.
[3]Saunders F,Wagoner R H.Forming of tailor-welded blanks[J].Metallurgical and Materials Transactions A,1996,27(9):2605-2616.
[4]张士宏,许沂,王忠堂,等.不等厚拼焊板材的成形性实验研究[J].锻压技术,2002,27(1):7-8.
[5]Min K B,Kim S,Kang S S.A study on resistance weldingin steel sheets by tailor welded blank(Ⅰ)[J].Master.Process Technol.,2000,(101):186-192.
[6]Min K B,Kang S S.A study on resistance welding in steelsheets by tailor welded blank(Ⅱ)[J].Master.ProcessTechnol.,2000,(103):218-224.
[7]王忠堂,张士宏,郑洁.拼焊板方盒件拉延成形焊缝移动规律研究[J].塑性工程学报,2006,13(5):69-71.
[8]朱宝泉,马占国.拼焊板方盒件拉深成形中焊缝移动规律的研究[J].锻压技术,2003,28(2):25-27.
[9]Zhang S H,Xu Y C,Palumbo G,et al.Formability andprocess conditions of magnesium alloy sheets[J].MaterialsScience Forum,2005,(488-489):453-456.
[10]Zhang S H,Li Z G,Xu Y C,et al.Press forming of magne-sium alloy AZ31 sheets[J].Materials Science Forum,2007,(539-543):1753-1758.
[11]陈振华.变形镁合金[M].北京:化学工业出版社,2005.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
