|
摘要：
|
|
根据夹片的结构特点及技术要求,围绕如何保证产品质量、提高生产效率、简化模具结构,设计了这套复合模具。设计的关键是采用了一个活动的弯曲凹模和一个兼作弯曲凸模的顶出器,通过活动弯曲凹模的进退,将传统的分模加工合二为一,使落料、冲孔、压弯一次成形,避免了分模加工中定位误差的产生,从而保证了质量,降低了成本,提高了生产率。
|
|
A composite die for clip-blanking,punching and bending was designed according to the structure and specifications of clamping pieces by considering how to guarantee product quality,improve production efficiency and simplify die construction simultaneously.The key of this design was to adopt a mobile bending concave die and a backing out punch which also acted as a male bending die.By the advance and retreat of the concave die,the traditional sub-module processing was combined into one process by integrating blanking,punching and bending in one step.This design can guarantee quality,reduce costs and improve productivity.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]王绪芳.异形垫圈落料冲孔复合模具设计[J].锻压技术,2006,31(4):64-65.
[2]杨太德.支架冲压工艺与模具设计[J].锻压技术,2007,32(5):101-102,164.
[3]王孝培.冲压手册[M].北京:机械工业出版社,2002.
[4]周大隽.冲模结构设计要领与范例[M].北京:机械工业出版社,2006.
[5]候义馨.冲压工艺及模具设计[M].北京:兵器工业出版社,1994.
[6]刘建超.冲压模具设计与制造[M].高等教育出版社,2004.
[7]王喜,陈明和.铍青铜零件弯曲工艺及模具设计[J].锻压技术,2006,31(3):86.
[8]欧阳波仪.现代冷冲模设计基础实例[M].北京:化学工业出版社,2006.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
