锻压技术

Co40NiCrMo合金本构关系的建立

英文标题：Establishment of constitutive relationship for Co40NiCrMo alloy

作者：郭生武吴会平程羽郭成

单位：西安交通大学金属材料强度国家重点实验室西安交通大学模具与塑性加工研究所西安交通大学模具与塑性加工研究所西安交通大学模具与塑性加工研究所陕西西安710049 西安交通大学模具与塑性加工研究所陕西西安710049 陕西西安710049 上海交通大学塑性成形系上海200030 陕西西安710049 陕西西安710049

关键词：Co40NiCrMo合金本构关系 Zener-Hollomon参数塑性变形

分类号：TG115.53

出版年,卷(期):页码：2008,33(1):152-157

摘要：

根据Co40NiCrMo合金在THERMECMASTOR-Z热模拟机上进行等温压缩试验的数据,研究了Co40NiCrMo合金的本构关系模型,建立了以Zener-Hollomon参数和热变形参数为基本变量的Co40NiCrMo合金本构关系方程。绝大多数情况下误差仅为5%,误差最大值为5.8023%,误差大于5%的情况仅占试验规范的6%左右。所建立的本构关系能正确反映合金对锻造热力参数的动态响应特征,而且可以很好地描述不同应变、应变速率、温度时的应力特征。以Co40NiCrMo合金的金相试验为基础,研究热变形参数对Co40NiCrMo合金微观组织的影响规律,建立Co40NiCrMo合金在高温变形过程中的微观组织演化模型。建立的微观组织演化模型能够较好地反映热态变形时锻造热力参数对Co40NiCrMo合金显微组织演化过程和再结晶晶粒尺寸的影响规律。

The constitutive relationship of Co40NiCrMo alloy was studied based on the experimental results of compression tests carried out on the THERMECMASTOR-Z hot work simulation machine,and the constitutive relationship model using the Zener-Hollomon parameter and hot deformation parameters as the primary variable was established.In most instances,the error was less than 5%,and the largest error was 5.8023%.The equation can reflect the alloy's dynamic response character to deforming parameters and represent the stress character in different strain,strain rate and temperature;it can be used for the finite element simulation of plastic forming process and the dissipative structure theory.The effects of process parameters on the microstructure were studied on the basis of metallurgical analysis and the prediction model of microstructure evolution was established.The prediction model of microstructure evolution can reflect the influence of deformation parameters on microstructure.

基金项目：

参考文献：

[1]陈复民.弹性合金[M].上海:上海科学技术出版社,1986.
[2](苏)拉赫什塔德著,王传恩译.弹簧钢与合金[M].北京:机械工业出版社,1992.
[3]郑晓辉,郭生武,韩海波,等.冷拔Co40NiCr Mo合金的显微组织和拉伸性能研究[J].稀有金属材料与工程,2005,34(8):1302-1305.
[4]Wang Minting,Li Xuetong,Du Fengshan,et al.Hot de-formation of austenite and prediction of microstructure evolu-tion of cross-wedge rolling[J].Materials Science and Engi-neering,2004,A379:133-140.
[5]郭生武,吴会平,程羽,等.热变形参数对Co40NiCr Mo合金微观组织的影响[J].稀有金属材料与工程,2006,35(3):433-436.
[6]Meyers M A,Benson D J,Vohringer O,et al.Constitutivedescription of dynamic deformation:physically-based mecha-nisms[J].Materials Science and Engineering,2002,A322:194-216.
[7]刘东,罗子健.以Zener-Hollomon参数表示的GH169合金的本构关系[J].塑性工程学报,1995,2(1):15-21.
[8]Lu Shiqiang,Shang Baozhong,Luo Zijian,et al.Establish-ment of the constitutive relationshipfor MP159 Alloy[J].J.Mater.Sci.Technol.,1999,15(3):239-244.

服务与反馈：

【文章下载】【加入收藏】