锻压技术

QA35Y-30液压联合冲剪机的研制

英文标题：Design of QA35Y-30 hydraulic combined punching and shearing machine

作者：阎青松陈华丰

单位：广东机电职业技术学院机电工程系长沙冲剪机床有限公司广东广州510515 华南理工大学机械工程学院广东广州510640 湖南长沙410009

关键词：冲剪机液压联合冲剪机冲剪

分类号：TG385

出版年,卷(期):页码：2008,33(1):109-112

摘要：

开发了一种新型液压联合冲剪机QA35Y-30。该设备采用单缸结构,通过机械杠杆驱动冲压工作机构;采取单片机控制,可实现单次、连续、微动等冲压及剪切操作,并具有自动计数及预置等功能。剪切工作机构采用参数优化设计,在功率相同、结构简化的情况下,可剪切的最大方钢、圆钢、角钢等尺寸明显增加,一次剪切宽度可提高28.3%,机器的净重降低了1 t,外形长度尺寸减小了400 mm,减少率达到14.7%。QA35Y-30是高效率、低能耗的机、电、液一体化设备。

A new hydraulic combined punching and shearing machine QA35Y-30 was designed.It adopted the single-cylinder and transmission lever controlled by the MCU to realize single,continuous,micro punching and shearing operation,and had the function of automatic counting and pre-setting.Shearing mechanism was optimized.So,with the same power and simplified structure,the ability of cutting steels of different shape such as square,round,angle,etc.was increased obviously.Comparing with other machines,the single cutting width was increased by 28.3%.The machine net weight was reduced by 1 t,the contour was reduced by 400mm in the length,and 14.7% reduction rate was achieved.So the QA35Y-30 is a high efficiency and low energy consumption machine with the feature of mechanical,electrical and hydraulic integration.

基金项目：

参考文献：

[1]刘庆印,白人朴.我国锻压设备产业竞争力分析[J].锻压技术,2005,30(5):101-106.
[2]董林福,赵艳春.液压与气压传动[M].北京:化学工业出版社.2006.163-267.
[3]阳林,孙友松.数控压力机新型液压驱动系统[J].锻压技术,2005,30(3):60-63.
[4]方世杰,耀光.机械优化设计[M].北京:机械工业出版社.2003.3-12.
[5]蔡学熙.现代机械设计方法实用手册[M].北京:化学工业出版社.2004.296-284.
[6]李中年.控制电器及应用[M].北京:清华大学出版社,2006.178-181.
[7]鲁远栋.PLC机电控制系统应用技术[M].北京:电子工业出版社,2006.218-221.

服务与反馈：

【文章下载】【加入收藏】