|
摘要：
|
|
提出了一种偏心轴类零件楔横轧成形新工艺,给出了楔横轧成形偏心轴类零件轧辊的辊型曲面。利用三维弹塑性有限元软件LS-DYNA对一种典型偏心轴类零件楔横轧成形进行了数值模拟,分析了其成形过程、应力应变场分布及工艺特点。模拟结果表明,从起楔开始就将坯料轧制成偏心圆截面的偏心轴类零件的楔横轧工艺是完全可行的,而且具有轧制力小、变形容易控制等优点。
|
|
A new methodology of cross wedge rolling of shaft parts with eccentric section was presented,and the roller profile surface of tools was provided.The cross wedge rolling deformation process of shaft parts with eccentric section was simulated with three-dimension finite element soft LS-DYNA by using elastic-plastic finite element method.The deformation process,the distribution of stress-strain and the technology characteristics of shaft parts with eccentric section were analyzed.Simulation results indicate that the new methodology of cross wedge rolling of shaft parts with eccentric section is feasible,the rolling force is small and the deformation is easy to control.
|
|
基金项目：
|
|
国家自然科学基金资助项目(50435010、50675019);;
国家科技支撑计划资助项目(2006BAF04B03);;
华中科技大学塑性成形模拟及模具技术国家重点实验室资助项目(06-4)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]胡正寰,张康生,王宝雨,等.楔横轧零件成形技术与模拟仿真[M].北京:冶金工业出版社,2004.
[2]梁继才,白志斌,李东平,等.轧制非回转体轮廓的楔横轧辊形曲面[J].农业机械学报,1996,27(2):154-156.
[3]白志斌,李东平,洪钟延.汽车刹车蹄片轴的偏心精密成形[J].吉林工业大学自然科学学报,2000,30(4):21-23.
[4]梁继才.轧制非回转体轮廓的楔横轧辊形曲面[J].农业机械学报,1996,27(2):154-156.
[5]梁继才,白志斌,任广升.轧制非圆锻坯的楔横轧机附属装置[P].中国专利:94213751.5,1994-06-07.
[6]任广升,白志斌,洪钟延,等.楔横轧偏心变形分析与力参数计算[J].吉林工业大学学报,1992,22(3):87-91.
[7]任广升,白志斌,洪忠延,等.楔横轧成形偏心件的条件与相位效应[J].农业机械学报,1992,23(4):71-76.
[8]张承鉴,任广升,洪忠延,等.偏心阶梯轴的楔横轧工艺[P].中国专利:88102735.9,1988-05-16.
[9]虞跃生,万贤毅.汽车上偏心轴类件的楔横轧工艺研究及应用[J].汽车科技,2003,(3):34-36.
[10]Hallquist J O.LS-DYNA Theoretical Manual[Z].Liver-more Software Technology Corporation,1998.
[11]周纪华,管克智.金属塑性变形阻力[M].北京:机械工业出版社,1989.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
