|
摘要：
|
|
通过比较冲压工艺设计参数和冲压成形性能指标的异同,面向各种冲压板料提出利用真实和虚拟成形性能试验修订和构建冲压成形工艺设计参数及其数据库的设想。通过阐述冲压成形性能试验在通用、复杂和虚拟模拟等不同冲压成形工艺分析中的应用方法,并推介一种能够利用冲压成形性能检测数值计算冲压成形难度的"形状分析法",为GB/T15825在冲压成形生产中的技术应用提供了方法性参考。
|
|
Comparing the technical parameters of sheet metal forming with formability indexes,the proposition was put forward to update these parameters and set up their database for various sheet metals by means of real and virtual forming tests in this paper.How to use formability test data to analyze various tecchnical processes,in the general,complex and virtual sheet metal forming were explained,the "Shape analyses method" was introduced which could calculate forming severity of sheet metal using the formability test data,and therefore the methodological reference is put forward for applying GB/T 15825《Sheet metal formability and test methods 》 in press forming manufacture.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1](苏)罗曼诺夫斯基Β.Π.著,梁炳文,迟家骏译.冷压手册(增订第2版)[M].北京:机械工业出版社,1957.
[2]Recommended procedure for performing the Swift cupping test[J].Sheet Metal Industries,1969,46(5):418-421.
[3]Hobbs R M.Use of grid strain analysis for die developmentand process control in Australian press shop[J].Sheet MetalIndustries,1978,55(4):451-454.
[4]Kuroda M,Tvergaard V.Effect of strain path changes onlimits to ductility of anisotropic metal sheets[J].Internation-al Journal of Mecha-nical Sciences,2000,42(5):867-887.
[5]美国金属学会编.金属手册(第九版)[M].北京:机械工业出版社,1994.
[6]林忠钦,李淑慧,于忠奇,等.车身覆盖件冲压成形仿真[M].北京:机械工业出版社,2005.
[7]Kasper A S,Vanderveen P J.A new method of predictingthe formobility of materiais[G],SAE Publication 720019.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
