锻压技术

机油滤清器壳体的正反拉深复合一次成形工艺

英文标题：Combined process of drawing and reverse drawing in one step of engine oil filter shell

作者：于鸣乔广金明华陆春林刘滨春

单位：吉林大学辊锻工艺研究所长春富维-江森自控汽车饰件系统有限公司空军航空大学航空理论系

关键词：机油滤清器壳体正反拉深筒形件

分类号：TG386.41

出版年,卷(期):页码：2009,34(6):94-96

摘要：

汽车的机油滤清器是保障汽车发动机可靠工作、延长发动机使用寿命的重要部件。机油滤清器壳体是典型的深筒形拉深件,通常需要多道次拉深成形。本文介绍了筒形件正反拉深复合成形的特点,提出了机油滤清器壳体的正反拉深复合一次成形工艺,设计了机油滤清器壳体的落料、正反拉深一次复合成形模具,并用于生产实际。达到了优质高产和节能降耗的目的。

Car oil filter is an important component to protect the work reliability of automotive engine,and extend engine life. Oil filter shell is a typical deep drawing cylindrical part,usually requires several deep drawing working procedures. The characteristic of combined foringm process of drawing and reverse drawing in one step for tube-shaped parts was described,combined foringm process of drawing and reverse drawing in one step for tube-shaped parts was put forward and its blanking die was designed and appled to the practical production. The objective of high-quality,high-yield and energy saving was realized.

基金项目：

参考文献：

[1]张俊红.汽车发动机构造[M].天津:天津大学出版社,2006.
[2]王毓民,王恒.实用汽车润滑技术手册[M].北京:化学工业出版社,北京:2005.
[3]中国机械工程学会锻压学会.锻压手册[M].北京:机械工业出版社,1993.
[4]陈炜.基于数值模拟的板料多道次拉深工艺研究[J].农业机械学报,2002,33(4):95-98.
[5]姜奎华主编.冲压工艺与模具设计[M].北京:机械工业出版社,1995.

服务与反馈：

【文章下载】【加入收藏】