|
轻型载货汽车纵梁模具设计及成形性仿真分析
|
|
英文标题：Die design and forming analysis on side-member of light truck |
|
作者：朱兴华 蔡炳芳 |
|
单位：江苏大学汽车与交通工程学院 |
|
关键词：纵梁 模具设计 成形性分析 |
|
分类号：TG386 |
|
出版年,卷(期):页码：2008,33(6):54-56 |
|
摘要：
|
|
汽车纵梁通常采用定尺板料,通过大型压力机和模具,分工序进行落料、冲孔和成形。本文对纵梁的冲压工艺特点进行了分析,介绍了纵梁的落料、弯曲通用复合模的结构形式以及设计要点。运用有限元软件Dynaform预测纵梁的冲压成形过程,查看板料成形过程中的起皱、破裂等现象,并制定合理的解决方案。
|
|
Sized sheet is often used to make the automobile side-members by the processes of blanking,piercing and forming with large presses and dies.Stamping process characteristics of the side-member were analyzed,and the blanking and bending composite die structure as well as design features were introduced.Stamping process was forecasted with FE(finite element)software Dynaform and phenomenon of wrinkle and crack were checked during the stamping process of the sheet.The reasonable solutions were made at last.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]景三辉,崔令江,肖湘蓉.热轧钢U形件弯曲回弹影响因素的分析[J].锻压技术,2006,31(5):127-129.
[2]宋楠.轻型车纵梁通用落料冲孔工艺及模具[J].锻压技术,1999,24(3):27-28.
[3]付宏生.冷冲压成形工艺与模具设计制造[M].北京:化学工业出版社,2004.
[4]乔晓勇.基于DYNAFORM汽车复杂覆盖件仿真模拟研究及应用[J].企业科技与发展,2007,(16):75-78.
[5]张在梅,殷晨波,陆志远.基于DYNAFORM的汽车覆盖件冲压仿真研究[J].中国制造业信息化,2007,36(5):25-29.
[6]陈文亮.板料成形CAE分析教程[M].北京:机械工业出版社,2005.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
