|
摘要：
|
|
微器件的市场需求急剧增加,微弯曲成形在微型产品的制造中起着至关重要的作用。尺度效应的影响使得微弯曲成形成为一个全新的领域。阐述了国内外近十多年来微弯曲成形方面尺度效应、晶粒尺寸以及摩擦等基础理论的发展,总结了微弯曲的成形方法、工模材料、成形系统、数值模拟以及成形精度方面的研究,并提出了利用陶瓷纤维制作微弯曲模,压电陶瓷作为驱动器,通过激光辅助加热的微弯曲成形系统。
|
|
With the rapid increase of market demand for micro parts,micro bending formation plays an important role in the fabrication of micro products.However,the influence of scale effect makes the micro forming into a totally new research field.After introducing the basic theory of scale effect,grain size and friction in the field of micro bending during the past ten years,its development in forming means,workpiece die material,forming system,numerical simulation and forming precision were discussed.Furthermore,a micro bending system with the laser-aided heating was presented,in which the piezoelectric ceramic was used for driver and micro bending die was made of ceramic fiber.
|
|
基金项目：
|
|
国家自然科学基金(50605029);;
中国博士后科学基金(20060390961);;
江苏省自然科学基金(BK2006551);;
高级人才启动基金(128300090)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Chau K,Allegretto W,Ristic L.Simulation of silicon mi-crostructures[J].Sensors and Materials,1991,(2):253-280.
[2]Stolken S,Evans G.A microbend test method for measuringthe plasticity length scale[J].Acta Mater.,1998,46:5109-5115.
[3]Kocanda A,Prejs T.Experimental analysis of the effect ofgrain size on the mechanical behavior of thin copper sheet inpure moment bending[J].Journal of Materials,2003,217(3):249-254.
[4]蒋振新,丁桂甫,杨春生,等.微弯曲面成型技术—多线成面技术[J].电子工艺技术,2003,(05):210-213.
[5]张凯锋,雷鹍.面向微细制造的微成形技术[J].中国机械工程,2004,15(12):1121-1127.
[6]Kals A,Eckstein R.Miniaturization in sheet metal working[J].Journal of Materials Processing Technology,2000,103:95-101.
[7]Fleck N A,Hutchinson W.A phenomenological theory forstrain gradient affects in plasticity[J].Mech.Phys.Solids,1993,41:1825-1857.
[8]Fleck A,Hutchinson W.Strain Gradient Plasticity[J].Ad-vanced Applied Mechanics,1997,33:295-361.
[9]Fleck A,Muller M,Ashby F,et al.Strain Gradient Plas-ticity Theory and Experiment[J].Acta Mater,1994,42(2):475-483.
[10]Wang W,Huang Y,Hsia K,et al.A study of microbendtest by strain gradient plasticity[J].International Journal ofPlasticity,2003,(19):365-382.
[11]Haque A,Saif MTA.Bending experiment on a 100nm thinAl cantilever beam using MEMS:effect of strain gradient[J].Advanced Applied Mechanics,1999,41:377-381.
[12]雷鵾,张凯锋.金属微成形中微尺度效应新分类及评估分析[J].哈尔滨工程大学学报,2006,27(01):26-31.
[13]李经天,董湘怀.微细塑性成形中第Ⅰ类尺度效应的研究[J].中国机械工程,2005,16(02):168-172.
[14]李雷,谢水生,黄国杰,等.超薄板料微弯曲成形过程中尺度效应的数值研究[A].第九届全国塑性工程学术年会、第二届全球华人先进塑性加工技术研讨会论文集(二)[C].太原,2005
[15]Vollertsen F,Niehoff H,Theiler C.State of the art in microforming and investigations into micro deep drawing[J].Journal of Materials Processing Technology,2004,151:70-79.
[16]Gavaliere P,Gabrielli F,Frantini L.Bending of very thinsheets:the influence of thickness on material characterization[A].The 8th International Conference on Metal Forming[C],Rotterdam,2000.
[17]Tiesler N,Engel U.Microforming—effects of Miniaturiza-tion[A].The Eighth International Conference on MetalForming[C].Rotterdam,2000.
[18]赵迎红,雷丽萍,曾攀.微塑性成形技术及其力学行为特征[J].塑性工程学报,2005,12(6):1-6.
[19]Motz C,Schoberl T,Pippan R.Mechanical properties of mi-cro-sized copper bending beams machined by the focused ionbeam technique[J].Acta Mater.,2005,53:4269-4279.
[20]Chen G,Xu X,Poon C,et al.Experimental and numericalstudies on microscale bending of stainless steel with pulsed la-ser[J].Journal of Applied Mechanics,1999,66(3):772-779.
[21]Jeong H,Hata S.Microforming of three-dimensional micro-structures from thin-film metallic glass[J].Journal of Mi-croelectromechanical,2003,(12):42-52.
[22]丁建宁,孟永刚,温诗铸.多晶硅微电子机械构件材料强度尺度效应研究[J].机械强度,2001,23(4):385-388.
[23]魏航,孙友松.金属微成形技术及其研究进展[J].锻压装备与制造技术,2005,(5):10-13.
[24]Kurimoto S,Hirota K,Nakano Y,et al.Improvement ofultra-fine piercing by means of vacuum system[J].AdvancedTechnology of Plasticity,2002,(1):391-396.
[25]王春举,单德彬,郭斌,等.纯铝和LY12铝合金微塑性成形性能评价试验研究[J].锻压技术,2005,30(1):7-10.
[26]王春举,曲东升,周健,等.精密微塑性成形系统的研制[J].锻压技术,2005,(3):56-59.
[27]黄晨光,段祝平.激光微弯曲成形机理的数值研究[J].中国激光,2002,A29(3):281-285.
[28]马宁,董湘怀.微细塑性成形计算机模拟技术研究[J].华中科技大学学报(自然科学版),2005,33(04):73-76.
[29]Pucher J.FE simulation of micro bending[A].The 7th In-ternational Conference on Sheet Metal[C].Bamberg,Mei-senbach,1999.
[30]Pucher H J,Fleckenstein M.FE simulation of the lead form-ing process and characterization of the mechanical properties[A].The Semicon West'97 Plastic Package ManufacturingConference[C].San Jose,1997.
[31]GAU Jenn-Temg,PRINCIPE Chris,WANG Jyhwen.Spri-ngback behavior of brass in micro sheet forming[J].Journalof Material Processing Technology,2007,191:7-10.
[32]Gau Jenn-Temg,Principe Chris,Wang Jyhwen.An experi-mental study on size effects on flow stress and formability ofaluminum and brass for microforming[J].Journal of Materi-al Processing Technology,2007,184:42-46.
[33]Zhang X,Xianfan Xu.High precision microscale bending bypulsed and CW lasers[J].Journal of Manufacturing Scienceand Engineering,2003,125(8):512-519.
[34]Peng X,Qin Y,Zhang X.A constitutive model for the met-als subjected to thermomechanical loading with fast heatingduring heating-assisted forming[J].Journal of MaterialsProcessing Technology,2005,167:244-250.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
