网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
楔横轧二次楔入力能参数试验研究
英文标题:Experimental study on mechanical parameters of second wedge heavy section shrinkage
作者:王明龙 张康生 娄依志 胡正寰  
单位:北京科技大学机械工程学院 北京科技大学机械工程学院 北京科技大学机械工程学院 北京科技大学机械工程学院 北京100083 北京100083 北京100083 北京100083 
关键词:楔横轧  大断面收缩率  二次楔入  轧制压力 
分类号:TG335
出版年,卷(期):页码:2007,32(4):25-29
摘要:
为了成形大断面收缩率轴类零件,进行了楔横轧二次楔入试验。试验按照工艺参数全排列进行,共有64组试验,通过试验得到一系列在不同工艺参数下的轧制压力数据。本文对该数据进行坏值剔除后,利用软件MAT-LAB对其进行综合分析处理,揭示了各工艺参数对轧制压力的影响规律,为模具、轧机的设计提供一定依据。
For the sake of the axis accessory's figuration,the experiment of second wedge heavy section shrinkage was carried out.There were 64 normal experiment troops in the experimentation.A lot of datas about the rolling force under the different mechanical parameters were gained.Using MATLAB to colligate and analyze the data after eliminating the bad data,the orderliness of the rolling force under different process parameters can be found,which gives a lot of gist to design the mould and rolling mill.
基金项目:
国家自然科学基金资助项目(50575023,50435010);; 高等学校博士学科点专项科研基金(20050008024)
作者简介:
参考文献:
[1]张燮昌,潘必刚,陈安平,等.拖拉机轴类件楔横轧成形工艺的研究[J].锻压技术,1987,22(3):34 36.
[2]叶庆荣.关于二辊楔横轧模具成形角和楔宽角的探讨[J].锻压技术,1982,17(5):9 14.
[3]胡正寰,张康生,王宝雨,等.楔横轧理论与应用[M].北京:冶金工业出版社,1996.
[4]张承鉴,张庆生,崔世强,等,楔横轧译文集[C].长春:吉林工业大学锻造工艺研究所,1982.
[5]杨翠萍,张康生,刘晋平,等.三辊楔横轧应力应变场对内部缺陷的影响[J].北京科技大学学报,2006,20(5):464 467.
服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9